Document Type : Original Reaearch Article

Authors

1 Material and Energy research Center, Department of Energy, Karaj, Iran

2 Department of Energy, Materials and Energy Research Center, Karaj, Iran

3 Material and Energy research Center, Department of Nanotechnology and Advanced Materials, Karaj, Iran

Abstract

In this work crushed coconut coir was chemically modified by EDM method and its performance as adsorbent for removal of nitrate from aqueous solutions was investigated. In this regard, the effect of various parameters like time, adsorbent dosage, nitrate initial concentration, pH, and temperature on the adsorption process was studied. It was observed that the kinetic data followed the pseudo-first order kinetic model and the adsorption isotherms were properly fitted to Langmuir model. Thermodynamic analysis showed that the adsorption process was spontaneous, exothermic with decreased randomness at solid-liquid interface. Moreover, the adsorbent showed a superior performance at neutral pH and the adsorbed nitrate could easily be desorbed by adjusting pH of the solution suggesting the reusability of the adsorbent.

Keywords

1. Dellavalle, C.T., et al. Int J Cancer, 2014, 134(12): p. 2917-26‎‏.‏
‎2.‎ Sharat D. Gangolli , P.A.v.d.B., Victor J. Feron , Christine Janzowsky , Jan H Koeman , Gerrit J.A. Speijers , ‎Berthold Spiegelhalder , Ronald Walker , John S. Wishnok, European Journal of Pharmacology, 1994, 292 ‎p. 1-38‎‏.‏
‎3. Loganathan P, Vigneswaran S, Kandasamy J., Journal of Environmental Management, 2013;131:363-74‎‏.‏
4.  Tyagi, S., et al., Journal of Water Process Engineering, 2018. 21: p. 84-95.
5.  Mautner, A., T. Kobkeatthawin, and A. Bismarck, Resource-Efficient Technologies, 2017. 3(1): p. 22-28.
6.   González Pérez, O. and J.M. Bisang, Electrochimica Acta, 2016. 194(Supplement C): p. 448-453.
7.  Lado, J.J., et al., Separation and Purification Technology, 2017. 183(Supplement C): p. 145-152.
‎8.‎  Nartsislav Petrov, T.B., Maria Razvigorova and Venecia Minkova, in CONFERENCE PAPER, 1999, 2nd ‎Olle Indstorm Symposium on renewable Energy-Bioenergy, At KTH, Stockholm, Sweden. p. 46-50‎‏.‏
‎9.‎ Claudio Della Rocca, V.B., Sureyya Meric, Disalination, 2007. 204: p. 46-62‎‏.‏
‎10.‎ Bhatnagar, A. and M. Sillanpää, Chemical Engineering Journal, 2011, 168(2): p. 493-504‎‏.‏
‎11.‎ U.S. Orlando, A.U.B., W. Nishijima, M. Okada, Chemosphere, 2002. 48: p. 1041-1046‎‏.‏
12. Biswas, S. and U. Mishra, Journal of Chemistry, 2015. 2015: p. 1-9.
13. Etim, U.J., S.A. Umoren, and U.M. Eduok, Journal of Saudi Chemical Society, 2016. 20(Supplement 1): p. S67-S76.
14. Li, Y., et al., Carbohydr Polym, 2013, 95(1): p. 501-7‎‏.‏
15.‎ Anirudhan, M.R.U.a.T.S., Ind. Eng. Chem. Res, 2001, 40: p. 2693-2701‎‏.‏
16. C. Namasivayam, D.S., Indian Journal of Chemical Technology, 2005. 12: p. 513-521.
17.  Bhatnagar, A., et al., Separation Science and Technology, 2008. 43(4): p. 886-907.
18.  Mishra, P.C. and R.K. Patel, J Environ Manage, 2009. 90(1): p. 519-22.
19.  Mizuta, K., et al., Bioresource Technology, 2004. 95(3): p. 255-257.
20. Öztürk, N. and T.E.l. Bektaş, Journal of Hazardous Materials, 2004. 112(1): p. 155-162.
21. Nunell, G.V., et al., Journal of Colloid and Interface Science, 2015. 440(Supplement C): p. 102-108.
‎22.‎ Duranoğlu, D., A.W. Trochimczuk, and U. Beker, Chemical Engineering Journal, 2012, 187: p. 193-202‎‏.‏
‎23.‎ Asef A. Khan, R.P.S., Colloids and Surfaces 1987, 24: ‎‏p. 33-42‎‏.‏
‎24.‎ Bulut Yasemin, T.Z., ‎Journal of Environmental Sciences 2007, 19: p. 160-166‎‏.‏