[1] Jacquet, P.A., "Electrolytic Polishing of Metallic Surfaces", Metal Finishing, 1949, Vol. 47, Pp. 48-54.
[2] Lee, S.J., and Lai, J.J., "The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel", Journal of Materials Processing Technology, 2003, Vol. 140, Pp. 206–210.
[3] Taylor, E.J., Crabb, H.M., Garich, H., Hall, T., and Inman, M., "A pulse/pulse reverse electrolytic approach to electropolishing and through-mask electroetching", Faraday Technology, 2012, Pp.768-780.
[4] Berns, H., Gavriljuk, V., and Riedner, S., "Structure", Engineering Materials, 2013, Pp. 21-83.
[5] Saito, K., "Development of electropolishing technology for superconducting cavities", Proceedings of the IEEE Particle Accelerator Conference, Portland, United States, 2003, Pp. 462-466.
[6] Sutow, E.J., "The influence of electropolishing on the corrosion resistance of 316L stainless steel", Journal of Biomedical Materials Research, 1980, Vol. 14, Pp. 587-595.
[7] Momeni, M., Esfandiari, M., and Moayed, M.H., “Improving pitting corrosion of 304 stainless steel by electropolishing technique", Iranian Journal of Materials Science & Engineering, 2012, Vol. 9, Pp. 34-42.
[8] Jin, S., Lu, X., Lin, L., and Zhao, K., "Study of buffered electropolishing on niobium sheet", Proceedings of SRF, 2009, Pp. 859-863.
[7] Eozenou, F., Berry, S., Gasser, Y., and Charrier, J.P., "More information concerning electro-polishing mechanisms in hydrofluoric–sulphuric acid mixtures", 14th International Conference on RF Superconductivity, Berlin, Dresden, 2009.
[8] Tash, M., Khalifa, W., and Hashash, A., "Effect of metallurgical differences between 356 and 384 alloys on their mechanical properties", Proceedings of The 9th Cairo University International Conference on Mechanical Design and Production (MDP-9), Cairo, Egypt, 2008, Pp. 992-1004.
[9] Simka. W., and Kaczmarek, M., "Electropolishing and passivation of NiTi shape memory alloy", Electrochimica Acta, 2010, Vol. 55, Pp. 2437–2441.
[10] Han, G., and Lu, Z., "Improving the oxidation resistance of 316L stainless steel in simulated pressurized water reactor primary water by electropolishing treatment", Journal of Nuclear Materials, 2015, Vol. 467, Pp. 194–204.
[11] Han, Y., Mei, J., and Peng, Q., "Effect of electropolishing on corrosion of Alloy 600 in high temperature water", Corrosion Science, 2015, Vol. 98, Pp. 72–80.
[12] Rotty, C., Doche, M.L., Mandroyan, A., Hihn, J.Y., Montavon, G., Moutarlier, V., “Comparison of electropolishing behaviours of TSC, ALM and cast 316L stainless steel in H
3PO
4/H
2SO
4”,
Surfaces and Interfaces, 2017, Vol. 6, Pp. 170–176.
[13] Han, Y., Han, E,H., Peng, Q., Ke, W., “Effects of electropolishing on corrosion and stress corrosion cracking of Alloy 182 in high temperature water”, Corrosion Science, 2017, Vol. 121, Pp. 1-10.
[15] Liu, M., Meng, Y., Zhao, Y., Li, F., Gong, Y., Feng, L., “Electropolishing parameters optimization for enhanced performance of nickel coating electroplated on mild steel”, Surface and Coatings Technology, 2016, Vol. 286, Pp. 285–292.
[16] Paulonis, D.F., and Schirra, J., "Alloy 718 at pratt and whitneyhistorical perspective and future challenges", The Minerals. Metals and Materials Society, 2001, Pp. 13-23.
[17] Lee, S.J., Lee, Y., and Du, M., "The polishing mechanism of electrochemical mechanical polishing technology", Journal of Materials Processing Technology, 2003, Vol. 140, Pp. 280–286.
[18] Pelleg, J., "Electropolishing Pure Vanadium", Nuclear Research, 1970, Pp. 457-460.
[19] Mural, S., Ramachandra, M., Murthy, K.S.S., and Ramant, K.S., "Eiectropoiishing of AI-7Si-0.3Mg Cast Alloy by Using perchloric and Nitric Acid Electrolytes", Materials characterization, 1997, Vol. 38, PP. 273-286.
[20]
Rahman, Z.U.,
Deen, K.M.,
Cano, L.,
Haider, W., “The effects of parametric changes in electropolishing process on surface properties of 316L stainless steel”,
Applied Surface Science, 2017, Vol. 410, Pp. 432-444.
[21] Nazneena, F., Galvina, P., Arriganb, W.M., Thompsonc, M., Benvenutoc, P., and Herzoga, G., "Electropolishing of medical-grade stainless steel in preparation for surface nano-texturing", Journal of Solid State Electrochemistry, 2012, Vol. 16 , Pp. 1389-1397.
[22] Aihara, H., "Surface and biocompatibility study of electropolished Co-Cr Alloy L605", Master's Theses and Graduate Research, San Jose State University, 2009, Pp. 36-99.