[1] M. Sohrabi, S. Hesaraki, A. Kazemzadeh, and M. Alizadeh, “Development of injectable biocomposites from hyaluronic acid and bioactive glass nano-particles obtained from different sol-gel routes.,” Mater. Sci. Eng. C. Mater. Biol. Appl., vol. 33, no. 7, pp. 3730–44, Oct. 2013.
[2] M. Sohrabi, S. Hesaraki, and A. Kazemzadeh, “The influence of polymeric component of bioactive glass-based nanocomposite paste on its rheological behaviors and in vitro responses : Hyaluronic acid versus sodium alginate,”
J Biomed Mater Res B Appl Biomater., vol.102B, pp. 561–573, 2014.
[3] R. Catteaux and I. Grattepanche-lebecq, “Synthesis , characterization and bioactivity of bioglasses in the Na2O – CaO – P2O5 – SiO2 system prepared via sol gel,” chemical engineering research and design, pp. 2420–2426, 2013.
[4] P. Sepulveda, J. R. Jones, and L. L. Hench, “Characterization of Melt-Derived 45S5 and sol-gel – derived 58S Bioactive Glasses,” J Biomed Mater Res (Appl Biomater), vol. 58 pp. 734–740, 2001.
[5] F. Mezahi, A. L.- Girot, H. Oudadesse, and A. Harabi, “Reactivity kinetics of 52S4 glass in the quaternary system SiO2 – CaO – Na2O – P2O5 : In fl uence of the synthesis process : Melting versus sol – gel,” J. Non. Cryst. Solids, vol. 361, pp. 111–118, 2013.
[6] A. Lucas-girot, F. Zohra, M. Mami, and H. Oudadesse, “Sol – gel synthesis of a new composition of bioactive glass in the quaternary Comparison with melting method,” Journal of Non-Crystalline Solids, vol. 357, pp. 3322–3327, 2011.
[7] I. Cacciotti, M. Lombardi, and L. Montanaro, “Sol – gel derived 45S5 bioglass : synthesis , microstructural evolution and thermal behaviour,” J Mater Sci: Mater Med, vol. 23 pp. 1849–1866, 2012.
[8] J. R. Jones, “Review of bioactive glass : From Hench to hybrids” Acta Biomaterialia, vol. 9, pp. 4457-4486, 2013
[9] Q. Chen and G. A. Thouas, “Fabrication and characterization of sol – gel derived 45S5 Bioglass – ceramic scaffolds,” Acta Biomaterialia, vol. 7, pp. 3616–3626, 2011.
[10] E. Rezabeigi, P. M. Wood-Adams, and R. a L. Drew, “Synthesis of 45S5 Bioglass® via a straightforward organic, nitrate-free sol-gel process.,” Mater. Sci. Eng. C. Mater. Biol. Appl., vol. 40, pp. 248–52, 2014.
[11] O. Kesmez, E. Burunkaya, N. Kiraz, H. E. Çamurlu, M. Asiltürk, E. Arpaç, “Effect of acid, water and alcohol ratios on sol-gel preparation of antireflective amorphous SiO2 coatings” Journal of Non-Crystalline Solids, vol. 357, pp. 3130–3135, 2011
[12] Q. Chen, Y. Li, L. Jin, J. M. W. Quinn, and P. A. Komesaroff, “A new sol – gel process for producing Na2O-containing bioactive glass ceramics,” Acta Biomaterialia, vol. 6, pp. 4143–4153, 2010.
[13] I. Cacciotti, M. Lombardi, A. Bianco, A. Ravaglioli, “Sol–gel derived 45S5 bioglass: synthesis, microstructural evolution and thermal behaviour” J Mater Sci: Mater Med, vol. 23, pp. 1849–1866, 2012.
[14] L. C. Klein, “Sol-gel processing of silicates” Ann. Rev. Mater. Sci., vol. 15, pp. 227-248, 1985.
[15] H. Active and M. Tio, “A Novel Acid-Base Catalyzed Sol-Gel Synthesis of Highly Active Mesoporous TiO2 Photocatalysts” Bull. Korean Chem. Soc., vol. 28, pp. 1951–1957, 2007.
[16] J. Chun, T. Oh, M. Luna, and M. Schweiger, “Colloids and Surfaces A : Physicochemical and Engineering Aspects Effect of particle size distribution on slurry rheology : Nuclear waste simulant slurries,” Colloids Surfaces A Physicochem. Eng. Asp., vol. 384, pp. 304–310, 2011.
[17] M. S. Bahniuk, H. Pirayesh, H. D. Singh, J. A. Nychka, L. D. Unsworth, “Bioactive Glass 45S5 Powders: Effect of Synthesis Route and Resultant Surface Chemistry and Crystallinity on Protein Adsorption from Human Plasma” Biointerphases, vol. 7, p. 41, 2012.