Journal of Advanced Materials and Technologies

Journal of Advanced Materials and Technologies

Effect of Ti and Cr interlayer on properties of diamond-like carbon coating formed by physical vapor deposition

Document Type : Original Reaearch Article

Authors
1 PhD, Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Tehran, Iran.
2 Associate Professor, Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran, Tehran, Iran.
10.30501/jamt.2026.589434.1368
Abstract
In the present study, diamond-like carbon thin films were formed by ion beam deposition using titanium (Ti) and chromium (Cr) interlayers. The effect of the interlayers on the structural and mechanical properties of the diamond-like carbon thin films was studied. Raman spectroscopy analysis was used to investigate the structural changes of the formed carbon coatings. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) were used to examine the thickness and surface roughness of the layers. The mechanical properties of the diamond-like carbon coatings were investigated by nanoindentation testing. The results of Raman analysis showed that the diamond-like carbon coating formed with a Ti interlayer had a lower ID/IG ratio and more sp3 diamond bonds than the diamond-like carbon monolayer coating and the carbon coating with a Cr interlayer. The results of the nanoindentation test for the carbon coatings showed that the inclusion of Ti and Cr interlayers led to an increase in the hardness of the diamond-like carbon coating. Also, according to the results, the Ti/DLC coating had higher hardness and plastic strength (H/E) than the Cr/DLC coating.
Keywords
Subjects

1.      Ahmed, S. F., Moon, M. W., & Lee, K. R. (2009). Effect of silver doping on optical property of diamond like carbon films. Thin Solid Films, 517(14), 4035-4038. https://doi.org/10.1016/j.tsf.2009.01.135
 
2.      Bewilogua, K., & Hofmann, D. (2014). History of diamond-like carbon films-From first experiments to worldwide applications. Surface and Coatings Technology, 242, 214-225. https://doi.org/10.1016/j.surfcoat.2014.01.031
 
3.      Chowdhury, S., Laugier, M. T., & Rahman, I. Z. (2004). Effects of substrate temperature on bonding structure and mechanical properties of amorphous carbon films. Thin Solid Films, 447, 174-180. https://doi.org/10.1016/S0040-6090(03)01076-9
 
4.      Eckertova, L. (1990). Physics of thin films, Chapter 1.
 
5.      Ferrari, A. C., & Robertson, J. (2000). Interpretation of Raman spectra of disordered and amorphous carbon. Physical review B, 61(20), 14095-14107. https://doi.org/10.1103/PhysRevB.61.14095
 
6.      Gotzmann, G., Beckmann, J., Wetzel, C., Scholz, B., Herrmann, U., & Neunzehn, J. (2017). Electron-beam modification of DLC coatings for biomedical applications. Surface and Coatings Technology, 311, 248-256. https://doi.org/10.1016/j.surfcoat.2016.12.080
 
7.      Huang L., Yuan J., Li Ch., & Hong D. (2018). Microstructure, tribological and cutting performance of Ti-DLC/α-C:H multilayer film on cemented carbide. Surface and Coatings Technology, 353, 163-170. https://doi.org/10.1016/j.matdes.2020.109320
 
8.      Kanda, K., Shimizugawa, Y., Haruyama, Y., Yamada, I., Matsui, S., Kitagawa, T., Tsubakino, H., & Gejo, T. (2003). NEXAFS study on substrate temperature dependence of DLC films formed by Ar cluster ion beam assisted deposition. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 206, 880-883. https://doi.org/10.1016/S0168-583X(03)00888-7
 
9.      Lifshitz, Y., Lempert, G. D., & Grossman, E. (1994). Substantiation of subplantation model for diamondlike film growth by atomic force microscopy. Physics Review Letter, 72(17), 2727-2753. https://doi.org/10.1103/PhysRevLett.72.2753
 
10.    Lifshitz, Y. (1999). Diamond-like carbon-present status. Diamond and Related Materials, 8(8-9), 1659-1676. https://doi.org/10.1016/S0925-9635(99)00087-4
 
11.    Marks, N. A. (2005). Thin film deposition of tetrahedral amorphous carbon: a molecular dynamics study. Diamond and Related Material, 14(8), 1223-1231. https://doi.org/10.1016/j.diamond.2004.10.047
 
 
13.    Mersagh Dezfuli, S., Rouholahi, S., Hosseini, S. H., Zangeneh Madar, K., Ebrahimi Fordoei, M. R., "Investigating of structural evolution of diamond-like carbon thin film applied by ion beam deposition technology under the effect of substrate temperature", Journal of Advanced Materials and Technologies (JAMT), Vol. 11, No. 3, (2022), 31-42. https://doi.org/10.30501/jamt.2022.349543.1233
 
14.    Mersagh Dezfuli, S. & Hosseini, S. H. (2024). A Study on the Role of Hydrocarbon Precursor on Structure of Diamond Like Carbon Coating Applied by Ion Beam Deposition Technology. Journal of Advanced Materials and Technologies, Vol. 13, No. 3, 63-74. [in Persian]. https://doi.org/10.30501/jamt.2024.473494.1304
 
15.    Robertson, J. (1994). The deposition mechanism of diamond-like a-C and a-C: H. Diamond Related Material, 3(4-6), 361-368. https://doi.org/10.1016/0925-9635(94)90186-4
 
 
17.    Wänstrand, O., Larsson, M., & Hedenqvist, P. (1999). Mechanical and tribological evaluation of PVD WC/C coatings. Surface and Coatings Technology, 111, (2-3), 247-254. https://doi.org/10.1016/S0257-8972(98)00821-4
 
18.    Yu, W., Wang, J., Huang, W., Cui, L., & Wang, L. (2020). Improving high temperature tribological performances of Si doped diamond-like carbon by using W interlayer. Tribology International, 146, 106241. https://doi.org/10.1016/j.triboint.2020.106241

  • Receive Date 02 July 2026
  • Revise Date 29 August 2026
  • Accept Date 27 October 2026