Document Type : Original Reaearch Article
Authors
1 Ph. D. Candidate, Biomaterials Research Group, Department of Nanotechnology and Advanced Materials, Materials and Energy Research Center, Karaj, Iran
2 Professor, Biomaterials Research Group, Department of Nanotechnology and Advanced Materials, Materials and Energy Research Center, Karaj, Iran
Abstract
Use of γ-glycidoxypropyltrimethoxysilane (GPTMS) enhances the stability and strength of hydrogels and improves the bioactivity and cellular performance of the scaffolds in bone applications. Given that one of the leading factors that affects the properties of the scaffold is the percentage of the cross-linking agent, chitosan and gelatin scaffolds with different percentages of GPTMS were prepared and evaluated through freeze-drying method. The results from Scanning Electron Microscope (SEM) confirmed the achievement of porous scaffolds with open pores and upon increasing the amount of cross-linking agent, the size of the pores reached approximately 290 microns. The results of the infrared spectrum showed the interaction among the polymers and process of cross-linking with the formation of silane groups. In this study, upon increasing the amount of the transverse bonding agent, the contact angle decreased, the optimal contact angle of the sample with 75 (weight percent) GPTMS reached 60.7 ± 3.5 degrees, and the percentages of both swelling and degradation ultimately decreased. It should be noted that the mechanical properties were improved by adding GPTMS up to 1590 ± 267 kPa. According to the findings of this study, application of GPTMS led to an enhancement in the bioactivity properties and deposition of the hydroxyapatite layer, and the X-ray diffraction pattern confirmed this claim. The obtained results support the hypothesis that gelatin-chitosan scaffolds with 75 (wt %) GPTMS seem to be the best samples for use in bone tissue engineering.
Keywords
- Zhang, Y., Liu, X., Zeng, L., Zhang, J., Zuo, J., Zou, J., Ding, J., Chen, X., "Polymer fiber scaffolds for bone and cartilage tissue engineering", Advanced Functional Materials, Vol. 29, No. 36, (2019), 1-20. https://doi.org/10.1002/adfm.201903279
- Kim, H. D., Hong, X., An, Y. H., Park, M. J., Kim, D. G., Greene, A. K., Padwa, B. L., Hwang, N. S., Lin, R. Z., Melero-Martin, J. M., "A biphasic osteovascular biomimetic scaffold for rapid and self-sustained endochondral ossification", Advanced Healthcare Materials, Vol. 10, No. 13, (2021), 2100070. https://doi.org/10.1002/adhm.202100070
- Tang, G., Tan, Z., Zeng, W., Wang, X., Shi, C., Liu, Y., He, H., Ceng, R., Ye, X., "Recent advances of chitosan-based injectable hydrogels for bone and dental tissue regeneration", Frontiers in Bioengineering and Biotechnology, Vol. 8, (2020), 1-15. https://doi.org/10.3389/fbioe.2020.587658
- Doozandeh, Z., Saber-Samandari, S., Khandan, A., "Preparation of novel Arabic gum-C6H9NO biopolymer as a bedsore for wound care application", Acta Medica Iranica, (2020), 520-530. https://doi.org/10.18502/acta.v58i10.4915
- Ghorbani, F., Sahranavard, M., Mousavi Nejad, Z., Li, D., Zamanian, A., Yu, B., "Surface functionalization of three dimensional-printed polycaprolactone-bioactive glass scaffolds by grafting GelMA under UV irradiation", Frontiers in Materials, Vol. 7, (2020), 1-17. https://doi.org/10.3389/fmats.2020.528590
- Maji, K., Dasgupta, S., "Characterization and in vitro evaluation of gelatin-chitosan scaffold reinforced with bioceramic nanoparticles for bone tissue engineering", Journal of Materials Research, Vol. 34, (2019), 2807-2818. https://doi.org/10.1557/jmr.2019.170
- Sahranavard, M., Zamanian, A., Ghorbani, F., Shahrezaee, M. H., "A critical review on three dimensional-printed chitosan hydrogels for development of tissue engineering", Bioprinting, Vol. 17, (2020), e00063. https://doi.org/10.1016/j.bprint.2019.e00063
- Aghabarari, B., "Biodiesel production using hybrid amino functionalized chitosan-carbon support as green catalyst", Journal of Renewable Energy and Environment (JREE), Vol. 3, (2016), 57-62. https://doi.org/10.30501/jree.2016.70085
- Karimi, M., Asefnejad, A., Aflaki, D., Surendar, A., Baharifar, H., Saber-Samandari, S., Khandan, A., Khan, A., Toghraie, D., "Fabrication of shapeless scaffolds reinforced with baghdadite-magnetite nanoparticles using a 3D printer and freeze-drying technique", Journal of Materials Research and Technology, Vol. 14, (2021), 3070-3079. https://doi.org/10.1016/j.jmrt.2021.08.084
- Parin, F. N., Terzioğlu, P., Sicak, Y., Yildirim, K., Öztürk, M., "Pine honey–loaded electrospun poly (vinyl alcohol)/gelatin nanofibers with antioxidant properties", The Journal of The Textile Institute, Vol. 112, No. 4, (2021), 628-635. https://doi.org/10.1080/00405000.2020.1773199
- Orshesh, Z., Hesaraki, S., Khanlarkhani, A., "Investigation of macroporous calcium phosphate cement obtained by foamed gelatin polymer", Advanced Ceramics Progress (ACERP), Vol. 2, (2017), 18-24. https://doi.org/10.30501/ACP.2016.70032
- Zhou, Z., Chen, J., Peng, C., Huang, T., Zhou, H., Ou, B., Chen, J., Liu, Q., He, S., Cao, D., Huang, H., Xiang, L., "Fabrication and physical properties of gelatin/sodium alginate/hyaluronic acid composite wound dressing hydrogel", Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, Vol. 51, No. (2014), 318-325. http://dx.doi.org/10.1080/10601325.2014.882693
- Öfkeli, F., Demir, D., Bölgen, N., "Biomimetic mineralization of chitosan/gelatin cryogels and in vivo biocompatibility assessments for bone tissue engineering", Journal of Applied Polymer Science, Vol. 138, (2021), 1-12. https://doi.org/10.1002/app.50337
- EzEldeen, M., Loos, J., Mousavi Nejad, Z., Cristaldi, M., Murgia, D., Braem, A., Jacobs, R., "A. Materials, O. Sciences, 3d-printing-assisted fabrication of chitosan scaffolds from different sources and cross-linkers for dental tissue engineering", European Cells and Materials, Vol. 40, (2021), 485-501. https://doi.org/10.22203/eCM.v041a31
- Liu, Y. L., Su, Y. H., Lai, J. Y., "In situ crosslinking of chitosan and formation of chitosan-silica hybrid membranes with using γ-glycidoxypropyltrimethoxysilane as a crosslinking agent", Polymer, Vol. 45, (2004), 6831-6837. https://doi.org/10.1016/j.polymer.2004.08.006
- Tonda-Turo, C., Gentile, P., Saracino, S., Chiono, V., Nandagiri, V. K., Muzio, G., Canuto, R. A., Ciardelli, G., "Comparative analysis of gelatin scaffolds crosslinked by genipin and silane coupling agent", International Journal of Biological Macromolecules, Vol. 49, Vo. 4, (2011), 700-706. https://doi.org/10.1016/j.ijbiomac.2011.07.002
- Hong, J., Jung, D., Park, S., Oh, Y., Oh, K. K., Lee, S. H., "Immobilization of laccase via cross-linked enzyme aggregates prepared using genipin as a natural cross-linker", International Journal of Biological Macromolecules, Vol. 169, (2021), 541-550. https://doi.org/10.1016/j.ijbiomac.2020.12.136
- Aidun, A., Zamanian, A., Ghorbani, F., "Novel bioactive porous starch–siloxane matrix for bone regeneration: Physicochemical, mechanical, and in vitro properties", Biotechnology and Applied Biochemistry, Vol. 66, (2019), 43-52. https://doi.org/10.1002/bab.1694
- Sohrabi, M., Eftekhari Yekta, B., Rezaie, H., Naimi-Jamal, M. R., Kumar, A., Cochis, A., Miola, M., Rimondini, L., "Enhancing mechanical properties and biological performances of injectable bioactive glass by gelatin and chitosan for bone small defect repair", Biomedicines, Vol. 8, No. 12, (2020), 1-19. https://doi.org/10.3390/biomedicines8120616
- Shirosaki, Y., Tsuru, K., Hayakawa, S., Osaka, A., Lopes, M. A., Santos, J. D., Costa, M. A., Fernandes, M. H., "Physical, chemical and in vitro biological profile of chitosan hybrid membrane as a function of organosiloxane concentration", Acta Biomaterialia, Vol. 5, No. 1, (2009), 346-355. https://doi.org/10.1016/j.actbio.2008.07.022
- Moreira, T. F. M., de Oliveira, A., da Silva, T. B. V., Dos Santos, A. R., Gonçalves, O. H., da Silva Gonzalez, R., Droval, A. A., Leimann, F. V., "Hydrogels based on gelatin: Effect of lactic and acetic acids on microstructural modifications, water absorption mechanisms and antibacterial activity", LWT-Food Science and Technology, Vol. 103, (2019), 69- https://doi.org/10.1016/j.lwt.2018.12.040
- Lee, J. B., Ko, Y. G., Cho, D., Park, W. H., Kwon, O. H., "Modification and optimization of electrospun gelatin sheets by electronbeam irradiation for soft tissue engineering", Biomaterials Research, Vol. 21, No. 1, (2017), 1- https://doi.org/10.1186/s40824-017-0100-z
- Dhawan, A., Kennedy, P. M., Rizk, E. B., Ozbolat, I. T., "Three-dimensional bioprinting for bone and cartilage restoration in orthopaedic surgery", Journal of the American Academy of Orthopaedic Surgeons, Vol. 27, No. 5, (2019), E215-E226. https://doi.org/10.5435/JAAOS-D-17-00632
- Imtiaz, N., Niazi, M. B. K., Fasim, F., Khan, B. A., Bano, S. A., Shah, G. M., Badshah, M., Menna, F., Uzair, B., "Fabrication of an original transparent PVA/gelatin hydrogel: In vitro antimicrobial activity against skin pathogens", International Journal of Polymer Science, (2019). https://doi.org/10.1155/2019/7651810
- Milad, F., Mirzaei, E., "Nanofibrillated chitosan/polycaprolactone bionanocomposite scaffold with improved tensile strength and cellular behavior", Nanomedicine Research Journal, Vol. 5, (2018), 77-89. https://doi.org/10.22038/nmj.2018.005.004
- Yang, S., Han, X., Jia, Y., Zhang, H., Tang, T., "Hydroxypropyltrimethyl ammonium chloride chitosan functionalized-PLGA electrospun fibrous membranes as antibacterialwound dressing: In vitro and in vivo evaluation", Polymers, Vol. 9, No. 3, (2017), 1-19. https://doi.org/10.3390/polym9120697
- Mohamed, N., "Synthesis of hybrid chitosan silver nanoparticles loaded with doxorubicin with promising anti-cancer activity", Bionanoscience, Vol. 10, (2020), 758-765. https://doi.org/10.1007/s12668-020-00760-y
- Aljohani, W., Ullah, M. W., Li, W., Shi, L., Zhang, X., Yang, G., "Three-dimensional printing of alginate-gelatin-agar scaffolds using free-form motor assisted microsyringe extrusion system", Journal of Polymer Research, Vol. 25, No. 3, (2018). https://doi.org/10.1007/s10965-018-1455-0
- Song, J., Yoon, B., Kim, H., Kim, H., "Bioactive and degradable hybridized nanofibers of gelatin–siloxane for bone regeneration", Journal of Biomedical Materials Research-Part A, Vol. 84, No. 4, (2008), 875-884. https://doi.org/10.1002/jbm.a.31330
- Tonda-Turo, C., Cipriani, E., Gnavi, S., Chiono, V., Mattu, C., Gentile, P., Perroteau, I., Zanetti, M., Ciardelli, G., "Crosslinked gelatin nanofibres: Preparation, characterisation and in vitro studies using glial-like cells", Materials Science and Engineering C, Vol. 33, No. 5, (2013), 2723-2735. https://doi.org/10.1016/j.msec.2013.02.039
- Ghorbani, F., Zamanian, A., Behnamghader, A., Daliri Joupari, M., "A novel pathway for in situ synthesis of modified gelatin microspheres by silane coupling agents as a bioactive platform", Journal of Applied Polymer Science, Vol. 135, No. 41, (2018), 1-10. https://doi.org/10.1002/app.46739
- Liu, J., Wang, S., Xu, K., Fan, Z., Wang, P., Xu, Z., Ren, X., Hu, S., Gao, Z., "Fabrication of double crosslinked chitosan/gelatin membranes with Na+ and pH dual-responsive controlled permeability", Polymer, Vol. 236, (2020). https://doi.org/10.1016/j.carbpol.2020.115963
- Ghorbani, F., Zamanian, A., Aidun, A., "Conductive electrospun polyurethane-polyaniline scaffolds coated with poly(vinyl alcohol)-GPTMS under oxygen plasma surface modification", Materials Today Communications, Vol. 22, (2020), 100752. https://doi.org/10.1016/j.mtcomm.2019.100752
- Nouri-Felekori, M., Khakbiz, M., Nezafati, N., Mohammadi, J., Eslaminejad, M. B., "Comparative analysis and properties evaluation of gelatin microspheres crosslinked with glutaraldehyde and 3-glycidoxypropyltrimethoxysilane as drug delivery systems for the antibiotic vancomycin", International Journal of Pharmaceutics, Vol. 557, (2019), 208-220. https://doi.org/10.1016/j.ijpharm.2018.12.054
- Liber-Kneć, A., Łagan, S., "Energy, surface testing of dental biomaterials—Determination of contact angle and surface free energy", Materials, Vol. 14, No. 11, (2021). https://doi.org/10.3390/ma14112716
- Koc, F. E., Altıncekic, T. G., "Investigation of gelatin/chitosan as potential biodegradable polymer films on swelling behavior and methylene blue release kinetics", Polymer Bulletin, (2020). https://doi.org/10.1007/s00289-020-03280-7
- Badawy, M. E., Taktak, N. E., Awad, O. M., Elfiki, S. A., El-Ela, N. E. A., "Preparation and characterization of biopolymers chitosan/alginate/gelatin gel spheres crosslinked by glutaraldehyde", Journal of Macromolecular Science, Part B, Vol. 56, No. 6, (2017), 359-372. https://doi.org/10.1080/00222348.2017.1316640
- Yang, G., Xiao, Z., Long, H., Ma, K., Zhang, J., Ren, X., Zhang, J., "Assessment of the characteristics and biocompatibility of gelatin sponge scaffolds prepared by various crosslinking methods", Scientific Reports, Vol. 8, (2018), 1-13. https://doi.org/10.1038/s41598-018-20006-y
- Sadeghinia, A., Soltani, S., Aghazadeh, M., Khalilifard, J., Davaran, S., "Design and fabrication of clinoptilolite–nanohydroxyapatite/chitosan–gelatin composite scaffold and evaluation of its effects on bone tissue engineering", Journal of Biomedical Materials Research-Part A, Vol. 108, No. 2, (2020), 221-233. https://doi.org/10.1002/jbm.a.36806
- Nie, L., Wu, Q., Long, H., Hu, K., Li, P., Wang, C., Sun, M., Dong, J., Wei, X., Suo, J., Hua, D., Liu, S., Yuan, H., Yang, S., "Development of chitosan/gelatin hydrogels incorporation of biphasic calcium phosphate nanoparticles for bone tissue engineering", Journal of Biomaterials Science, Polymer Edition, Vol. 30, No. 17, (2019), 1636-1657. https://doi.org/10.1080/09205063.2019.1654210
- Rezaei, H., Asefnejad, A., Joupari, M. D., Joughehdoust, S., "The physicochemical and mechanical investigation of siloxane modified gelatin/sodium alginate injectable hydrogels loaded by ascorbic acid and β-Glycerophosphate", Materials Today Communications, Vol. 26, (2020), 101914. https://doi.org/10.1016/j.mtcomm.2020.101914
- Adekogbe, I., Ghanem, A., "Fabrication and characterization of DTBP-crosslinked chitosan scaffolds for skin tissue engineering", Biomaterials, Vol. 26, (2005), 7241-7250. https://doi.org/10.1016/j.biomaterials.2005.05.043
- Peter, M., Ganesh, N., Selvamurugan, N., Nair, S. V., Furuike, T., Tamura, H., Jayakumar, R., "Preparation and characterization of chitosan-gelatin/nanohydroxyapatite composite scaffolds for tissue engineering applications", Carbohydrate Polymer, Vol. 80, No. 3, (2010), 687-694. https://doi.org/10.1016/j.carbpol.2009.11.050
- Alizadeh, M., Abbasi, F., Khoshfetrat, A. B., Ghaleh, H., "Microstructure and characteristic properties of gelatin/chitosan scaffold prepared by a combined freeze-drying/leaching method", Materials Science and Engineering: C, Vol. 33, No. 7, (2013), 3958-3967. https://doi.org/10.1016/j.msec.2013.05.039
- Feroz, S., Dias, G., "Hydroxypropylmethyl cellulose (HPMC) crosslinked keratin/hydroxyapatite (HA) scaffold fabrication, characterization and in vitro biocompatibility assessment as a bone graft for alveolar bone regeneration", Heliyon, Vol. 7, No. 11, (2021), e08294. https://doi.org/10.1016/j.heliyon.2021.e08294
- Arabi, N., Zamanian, A., Rashvand, S. N., Ghorbani, F., "The tunable porous structure of gelatin-bioglass nanocomposite scaffolds for bone tissue engineering applications: Physicochemical, mechanical, and in-vitro properties", Macromolecular Materials and Engineering, Vol. 303, No. 3, (2018), 1700539. https://doi.org/10.1002/mame.201700539
- Martins, A. M., Santos, M. I., Azevedo, H. S., Malafaya, P. B., Reis, R. L., "Natural origin scaffolds with in situ pore forming capability for bone tissue engineering applications", Acta Biomaterialia, Vol. 4, No. 6, (2008), 1637-1645. https://doi.org/10.1016/j.actbio.2008.06.004
- Madhumathi, K., Binulal, N. S., Nagahama, H., Tamura, H., Shalumon, K. T., Selvamurugan, N., Nair, S. V., Jayakumar, R., Canuto, R. A., Ciardell, G., "Preparation and characterization of novel β-chitin-hydroxyapatite composite membranes for tissue engineering applications", International Journal of Biological Macromolecules, Vol. 44, No. 1, (2009), 1-5. https://doi.org/10.1016/j.ijbiomac.2008.09.013
- Rasti, M., Hesaraki, S., Nezafati, N., "Effects of GPTMS concentration and powder to liquid ratio on the flowability and biodegradation behaviors of 45S5 bioglass/tragacanth bioactive composite pastes", Journal of Applied Polymer Science, Vol. 136, No. 22, (2019), 17-22. https://doi.org/10.1002/app.47604
- Mirhaj, M., Mahmoodi, M., Mirafzali, S. A., Alizadeh, M., Tavakoli, M., "Enhanced biomineralization of stem cells and adsorption of extracellular matrix proteins on bioactive scaffold reinforced with carboxylated multi-walled carbon nanotubes", Journal of Advanced Materials and Technologies (JAMT), Vol. 10, No. 4, (2022), 89-106. https://doi.org/10.30501/jamt.2021.278619.1164
- Kiran, A. S. K., Kumar, T. S., Sanghavi, R., Doble, M., Ramakrishna, S., "Antibacterial and bioactive surface modifications of titanium implants by PCL/TiO2 nanocomposite coatings", Nanomaterials, Vol. 8, No. 10, (2018). https://doi.org/10.3390/nano8100860
- Roh, H. S., Lee, C. M., Hwang, Y. H., Kook, M. S., Yang, S. W., Lee, D., Kim, B. H., "Addition of MgO nanoparticles and plasma surface treatment of three-dimensional printed polycaprolactone/hydroxyapatite scaffolds for improving bone regeneration", Materials Science and Engineering C, Vol. 74, (2017), 525-535. https://doi.org/10.1016/j.msec.2016.12.054
- Hassanzadeh Nemati, N., Ghasempour, E., Zamanian, A., "Effect of dual releasing of β-glycerophosphate and dexamethasone from Ti nanostructured surface for using in orthopedic applications", International Journal of Engineering, Transactions A: Basics, Vol. 32, No. 10, (2019), 1337-1344. https://doi.org/10.5829/ije.2019.32.10a.01