Journal of Advanced Materials and Technologies

Journal of Advanced Materials and Technologies

Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water

Authors
Behrooz Shayegh Boroujeny 1
Majid Moolyanian 2
Payam Raiesi Goojani 3
Mohammadreza Ghashghayi 2
1 University of Shahrekord Shahrekord, Department of Engineering, Sharekord, Iran.
2 Islamic Azad University, Najafabad Branch, Advanced Material Research Center, Esfahan, Iran
3 Graduate University of Advanced Technology of Kerman, Department of science and new technology, Kerman, Iran
10.30501/jamt.2017.70373
Abstract
 Zinc and its alloys have been recognized as sacrificial anodes due to being widely used in cathodic
protection systems. Problems caused by the high vapor pressure of this metal in the process of melting and casting have
caused that reform processes of the microscopic structure in the solid state for zinc attract a lot of attention. Straininduced melt activation (SIMA) process is one of the semi-solid forming processes in the production of parts with nondendritic structure. In this study, the effect of SIMA process on microstructure and electrochemical behavior of zinc
sacrificial anode has been examined. The samples were placed under the strain rates of 20-50%, different temperatures
in the range of 425-435°C and time periods of 10-40 minutes. Optimal spherical microstructure was obtained in 50%
cold work conditions, temperature of 430°C and 10 minutes. The results obtained from the polarization test and anode
test on the optimal spherical sample indicate a tangible reduction in electrochemical corrosion current density by 90%
and a slight decrease in anode efficiency compared to the raw sample. Elemental analysis (EDX), metallography images
and microhardness profile show the concentration of alloying elements on grain boundary and turning of uniform
corrosion into localized corrosion and thus reduced anode efficiency after SIMA process 
Keywords
Zinc sacrificial anode
SIMA process
polarization test
anode test
microhardness profile
  1. Kirkwood, D.H., Suéry, M., Kapranos, P., Atkinson, H.V., Young, K., Semi-Solid Processing of Alloys, Springer Series in Materials Science, 2010.
  2. Fan, Z., Microstructure and Mechanical Properties of Rheo-DieCast (RDC) Aluminium Alloys, Material Science and Engineering, 2011, 412 (1-2), 298-306.
  3. Doherty, R.D., Lee, H., Feet, E., Microstructure of Stire-cast Metals, Materials Science and Engineering, 1984, 65(1), 181-189.
  4. Turkeli, A., Akbas, N., Formation of Nondendritic Structure in 7075 Wrought Aluminum Alloy by SIMA Process and Effect of Heat Treatment, Proceedings of the 4th International Conference on Semi-Solid Processing of Alloys and Composites, Sheffield, 1996, 71–74.
  5. Zhang, X.G., Corrosion and Electrochemistry of Zinc, Springer Science & Business Media, New York, 1996, 403-405.
  6. Crundwell, R.F., Sacrificial Anodes — Old and New . In Cathodic Protection Theory and Practice, 2nd International Conference, Stratford upon Avon, 1989, 143-150.
  7. رنجبر، م.، احمد آبادی، م.ن.، اسماعیل زاده، م.، اصلاح ریزساختار نیمه جامد آلیاژ آلومینیوم 7075 به روش SIMA، دومین همایش مشترک انجمن متالورژی ایران و جامعه‌ی ریخته‌گران، کرج، دانشگاه آزاد اسلامی واحد کرج، 1386.
  8. Zaki, A., Principle of Corrosion Engineering and Corrosion Control, King Fahd University of Petroleum, Saudi Arabia, 2006.
  9. Young, S., Kyung-Tae, P., Chun Pyo, H., Recrystallization Behavior of 7175 Al Alloy during Modified Strain-Induced Melt-Activated (SIMA) Process, Materials Transactions, 2006, 47(4), 1250-1256.
  10. Bolouri, A., Shahmiri, M., Cheshmeh, E., Microstructural Evolution During Semisolid State Induced Melt Activation Process of Aluminum 7075 Alloy, Transaction of Nonferrous Metals Society of China, 2010, 20(9), 1663-1671.
  11. Hui-min, W., Chang-qing, X., Pan, L., Zhi-wei, W., Influence of Thermomechanical Aging on Microstructure and Mechanical Properties of 2519A Aluminum Alloy, Central South University Press, 2011, 18, 1349-1353.
  12. Stnbuy, E.E., Buchanan, R.A., Fundamentals of Electrochemical Corrosion, 2nd Edition, ASM International, 2000.

 

 

Journal of Advanced Materials and Technologies
Volume 6, Issue 3
Winter 2017
Pages 69-77

  • Receive Date 08 January 2017
  • Revise Date 04 August 2017
  • Accept Date 27 September 2017