Journal of Advanced Materials and Technologies

Journal of Advanced Materials and Technologies

Investigation of Step Annealing Heat Treatment on the Pitting Corrosion Resistance of Super Duplex Stainless Steel Welded Pipes

Authors
M. Yousefieh 1
A. Saatchi 2
M. Shamanian
M. Tamizifar 2
1 School of Materials Science and Engineering, Iran University of Science and Technology, Tehran
2 Department of Materials Engineering, Isfahan University of Technology, Isfahan
10.30501/jamt.2010.70246
Abstract
In this study, the effects of heat treatment on the microstructure and pitting corrosion resistance of super duplex stainless steel welds have been investigated. The results showed that step annealing treatments in the temperature range of 550–1000 °C resulted in a precipitation of sigma phase and Cr2N along the ferrite/austenite and ferrite/ferrite boundaries. At this temperature range, the metastable pits mainly nucleated around the precipitates formed in the grain boundary and ferrite phase. Above 1050 °C, the microstructure contains only austenite and ferrite phases. At this condition, the critical pitting temperature of samples successively arrived to the highest value obtained in this study.
Keywords
Heat treatment
corrosion
welding
Stai less steel
  1. V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, S. Sundaresan, "Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steels", Mater. Sci. Eng. A 358 (2003) 9–16.
  2.  R.N. Gunn, "Duplex stainless steels—microstructure,properties and applications", Abington Publishing, Cambridge, 2003.
  3. K.M. Lee, H.S. Cho, D.C. Chjoi, "Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austenite", J. Alloys Compd. 285 (1999) 156–161.
  4. D.Y. Kobayashi, S. Wolynec, "Evaluation of the low corrosion resistant phase formed during the sigma phase precipitation in duplex stainless steels", Mater. Res. 2(4) (1999) 239–247.
  5. J.C. Lippold, D.J. Kotecki, "Welding metallurgy and weldability of stainless steels", John Wiley & Sons, New York, 2005.
  6. J.O. Nilsson, "Super duplex stainless steels", Mater. Sci. Technol. 8 (1992) 685–700.
  7. A.J. Ramirez, J.C. Lippold, S.D. Brandi, "The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels", Met. Mat. Trans. A 34 (2003) 1575–1597.
  8. S.S.M. Tavares, J.M. Pardal , L.D. Lima, I.N. Bastos, A.M. Nascimento, J.A. de Souza, "Characterization of microstructure, chemical composition, corrosion resistance and toughness of a multipass weld joint of superduplex stainless
    steel UNS S32750", Mater. Charact. 58 (2007) 610–616.
  9.  L. Duprez, B.D. Cooman, N. Akdut, "Microstructure evolution during isothermal annealing of a standard duplex stainless steel type 1.4462", Steel Res. 71 (2000) 417–422. 
  10. C.J. Park, H.S. Kwon, "Electrochemical noise analysis of localized corrosion of duplex stainless 75 steel aged at 475 °C", Mater. Chem. Phys. 91 (2005) 355–360.
  11. Tan Hua, Jiang Yiming, Deng Bo, Sun Tao, Xu Juliang, Li Jin, "Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750", Mater. Charact. 60 (2009) 1049–1054.
  12. Zhang Lihua, Zhang Wei, Jiang Yiming, Deng Bo, Sun Daoming, Li Jin, "Influence of annealing treatment on the corrosion resistance of lean duplex stainless steel 2101", Electrochim. Acta. 54 (2009) 5387–5392.
  13. Zhang Wei, Jiang Laizhu, Hu Jincheng, Song Hongmei, "Effect of ageing on precipitation and impact energy of 2101 economical duplex stainless steel", Mater. Charact. 60 (2009) 50–55.
  14. F. Shi, L.J. Wang, W.F. Cui, C.M. Liu, "Precipitation behavior of M2N in a high-nitrogen austenitic stainless steel during isothermal aging", Acta Metall. Sin. (Engl Lett). 20(2) (2007) 95– 101.
  15. B.o. Deng, Wang Zhiyu, Jiang Yiming, Wang Hao, Gao Juan, Li Jin, "Evaluation of localized corrosion in duplex stainless steel aged at 850 °C with critical pitting temperature measurement", Electrochim. Acta. 54 (2008) 2790–2794.
  16. B.o. Deng, Jiang Yiming, "Dependence of critical pitting temperature on the concentration of sulphate ion in chloride-containing solutions", Appl. Surf. Sci. 253 (2007) 7369–7375.
  17. M.H. Moayed, N.J. Laycock, "Dependence of the Critical Pitting Temperature on surface roughness", Corros. Sci. 45 (2003) 1203–1216.
  18.  R. Ovarfort, "Critical pitting temperature measurements of stainless steels with an improved electrochemical method", Corros. Sci. 29 (1989) 987–993.
  19.  Image Tool version 3.0, University of Texas Health Science Center at San Antonio, free software, Available in http:// 
    ddsdx.uthscsa.edu/dig/itdesc.html. Access in 09.03.2007.
  20.  M.A. Domínguez-Aguilar, R.C. Newman, "Detection of deleterious phases in duplex stainless steel by weak galvanostatic polarization in alkaline solution", Corros. Sci. 48 (2006) 2560– 2576.
  21. C.J. Park, H.S. Kwon, M.M. Lohrengel, "Microelectrochemical polarization study on 25% Cr duplex stainless steel", Mat. Sci. Eng. A 372 (2004) 180–185.
  22. Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels, Designation, pp. 150–199.
  23.  M.E. Wilms, V.J. Gadgil, J.M. Krougmen, F.P. Ijsseling, "The effect of σ-phase precipitation at 800 °C on the corrosion resistance in sea-water of a high alloyed duplex stainless steel", Corros. Sci. 36 (1994) 877–881.
  24.  Michael Pohl, Oliver Storz, Thomas Glogowski, "Effect of intermetallic precipitations on the properties of duplex stainless steel", Mater. Charact. 58 (2007) 65-71. 
  25. V.S. Moura, L.D. Lima, J.M. Pardal, A.Y. Kina, R.R.A. Corte, S.S.M. Tavares, "Influence of microstructure on the corrosion resistance of the duplex stainless steel UNS S31803", Mater. Charact. 59 (2008) 1127-1132.
  26. G. Lothongkum, P. Wongpanya, S. Morito, T. Furuhara, T. Maki, "Effect of nitrogen on corrosion behavior of 28Cr–7Ni duplex and microduplex stainless steels in air-saturated 3.5% NaCl solution", Corros. Sci. 48 (2006) 137–153.
  27. L. Weber, P.J. Uggowitzer, "Partitioning of chromium and molybdenum in duplex stainless steels with respect to nitrogen and nickel content", Mater. Sci. Eng. A 242 (1998) 222–229. 
Journal of Advanced Materials and Technologies
Volume 2, Issue 4
Winter 2013
Pages 67-75

  • Receive Date 26 September 2010
  • Revise Date 17 January 2014
  • Accept Date 22 February 2014