Today's mixed metal oxide anodes are widely used in the chloralkali media. Stability is one of the main properties of these anodes because of their high cost. In this article, the effect of heating rate, environment and oxygen on the morphology and electrochemical stability of Ti/ (10Ti–20Ru–70Sn) O2 anode has been investigated. The anodes were prepared by brushing and thermal decomposition method. Mud cracked morphology appeared on the sample by this process. Air is the best environment and putting samples in the furnace without heating rate are the best result for obtaining the highest stability and the best morphology.
(2009). The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium. Journal of Advanced Materials and Technologies, -2(3*), 263-271. doi: 10.30501/jamt.2631.70152
MLA
. "The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium", Journal of Advanced Materials and Technologies, -2, 3*, 2009, 263-271. doi: 10.30501/jamt.2631.70152
HARVARD
(2009). 'The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium', Journal of Advanced Materials and Technologies, -2(3*), pp. 263-271. doi: 10.30501/jamt.2631.70152
CHICAGO
, "The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium," Journal of Advanced Materials and Technologies, -2 3* (2009): 263-271, doi: 10.30501/jamt.2631.70152
VANCOUVER
The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium. J. Adv. Mater. Technol., 2009; -2(3*): 263-271. doi: 10.30501/jamt.2631.70152
