In this paper the samples based on MoSi2 in Mo-Si-Al triple system were produced. Their densification was studied without using complementary methods and external pressure during synthesis via SHS method. Initially, raw materials (Mo-Si-A) were weighted and mixed together corresponding to Mo (Si 1-x, Alx) 2 with 0.2≤X≤0.5. Mixed powders were pressed by a uniaxial pressing. Then the obtained pellets were preheat and synthesized in combustion reactor. Finally, the parameters affected the samples properties such as percentage of Si substitution with Al, particle size of Si powder, pressing pressure; preheating process and ignition temperature were optimized. The results show that the final densities of synthesized samples were up to 90% TD and their microstructure were uniform.
(2008). Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure. Journal of Advanced Materials and Technologies, -4(1*), 45-50. doi: 10.30501/jamt.2631.70118
MLA
. "Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure", Journal of Advanced Materials and Technologies, -4, 1*, 2008, 45-50. doi: 10.30501/jamt.2631.70118
HARVARD
(2008). 'Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure', Journal of Advanced Materials and Technologies, -4(1*), pp. 45-50. doi: 10.30501/jamt.2631.70118
CHICAGO
, "Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure," Journal of Advanced Materials and Technologies, -4 1* (2008): 45-50, doi: 10.30501/jamt.2631.70118
VANCOUVER
Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure. J. Adv. Mater. Technol., 2008; -4(1*): 45-50. doi: 10.30501/jamt.2631.70118
