Journal of Advanced Materials and Technologies

Journal of Advanced Materials and Technologies

Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method

Document Type : Original Reaearch Article

Authors
Jalaladdin Hosseinzadeh 1
Sahebali Manafi 2
1 M. Sc., Faculty of Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Semnan, Iran
2 Professor, Department of Materials Engineering, Faculty of Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Semnan, Iran
10.30501/jamt.2021.248565.1122
Abstract
In this study, hydroxyapatite was produced and produced from yellow fish bones by hydrothermal method at two temperatures of 150 and 200 °C using water and alcohol additives. X-ray diffraction (XRD) analysis, infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to study the fuzzy structure, identification of powder organic compounds and particle morphology, respectively. XRD results showed that the peaks related to hydroxyapatite are in the range . According to the obtained results, it was found that to form the structure of hydroxyapatite, a minimum temperature of 200 degrees Celsius with water additive solution is required. The FTIR results also showed that the peak of 1032 cm-1 belongs to the chemical group and the peak of 560 cm-1 belongs to . As a result, the obtained hydroxyapatite powder ( ) can be used in medical work.
Keywords
Hydroxyapatite
Fish Bone
X-Ray Diffraction (XRD)
Infrared Spectroscopy (FTIR)
Scanning Electron Microscopy (SEM)

Subjects

  1. Agbeboh, N. I., Oladele, I. O., Daramola, O. O., Adediran, A. A., Olasukanmi, O. O., Tanimola, M. O., "Environmentally sustainable processes for the synthesis of hydroxyapatite", Heliyon, Vol. 6, No. 4, (2020), e03765. https://doi.org/10.1016/j.heliyon.2020.e03765
  2. Jones, F. H., "Teeth and bones: Application of surface science to dental materials and related biomaterials", Surface Science Reports, Vol. 42, No. 3-5, (2001), 75-205. https://doi.org/10.1016/S0167-5729(00)00011-X
  3. Couteney-Harris, R. G., Kayser, M. V., Downes, S., "Comparision of the early production of extracellular matrix on dense hydroxyapatite and hydroxyapatite-coated titanium in cell and organ culture", Journal of Biomaterials, Vol. 16, No. 6, (1995), 489-495. https://doi.org/10.1016/0142-9612(95)98823-W
  4. Junqueira, L. C., Carneiro, J.,Basic Histology, Text & Atlas, Foltin, J., Lebowitz, H., Boyle, P. J. (Eds.), 10th, McGraw-Hill Companies, (2003), 144. https://www.amazon.com/Basic-Histology-Text-Atlas-10th/dp/0071378294
  5. Mohd Pu'ad, N. A. S., Abdul Haq, R. H., Mohd Noh, H., Abdullah, H. Z., Idris, M. I., Lee, T. C., "Nano-size hydroxyapatite extracted from tilapia scale using alkaline heat treatment method", Materials Today: Proceedings, Vol. 29, No. 1, (2020), 218-222. https://doi.org/1016/j.matpr.2020.05.537
  6. Singh, G., Singh Jolly, S., Pal Singh, R., "Cerium substituted hydroxyapatite mesoporous nanorods: Synthesis and characterization for drug delivery applications", Materials Today: Proceedings, Vol. 28, No. 3, (2020), 1460-1466. https://doi.org/10.1016/j.matpr.2020.04.821
  7. Khalid, H., Chaudhry, A. A., "Basics of hydroxyapatite—structure, synthesis, properties, and clinical applications", In Handbook of Ionic Substituted Hydroxyapatites, Woodhead Publishing Series in Biomaterials, (2020), 85-115. https://doi.org/10.1016/B978-0-08-102834-6.00004-5
  8. Mozaffari, M., Johari, N., Fathi, M. H., "Poly (e-caprolactone)/hydroxyapatite scaffold: Evaluation of the effect of the amount of hydroxyapatite particles, compare of the effect of nanoscale and microscale particles and the effect of them on mechanical and biodegradable properties of bone tissue engineering scaffold", Journal of New Materials, Vol. 5, No. 4 (20), (2015), 129-139. https://www.sid.ir/en/journal/ViewPaper.aspx?ID=510431
  9. Sakka, S., Bouaziz, J., Ben Ayed, F., "Mechanical Properties of Biomaterials Based on Calcium Phosphates and Bioinert Oxides for Applications in Biomedicine", In Advances in Biomaterials Science and Biomedical Applications, IntechOpen Book Series, (2013), 23-50. https://doi.org/10.5772/53088
  10. Gomes, D. S., Santos, A. M. C., Neves, G. A., Menezes, R. R., "A brief review on hydroxyapatite production and use in biomedicine", Cerâmica, Vol. 65, No. 374, (2019), 282-302. http://doi.org/10.1590/0366-69132019653742706
  11. Basiri, H., Mehrizi, A. A., Bakhshi, F., "Synthesis and characterization of magnesium hydroxyapatite nanopowders for enamel remineralization of initial caries lesions", Journal of Advanced Materials and Technologies (JAMT), Vol. 6, No. 4, (2017), 1-10. (In Farsi). https://doi.org/30501/JAMT.2018.70376
  12. Mohd Pu'ad, N. A. S., Abdul-Haq, R. H., Mohd Noh, H., Abdullah, H. Z., Idris, M. I., Lee. T. C., "Synthesis method of hydroxyapatite: A review", Materials Today: Proceedings, Vol. 29, No. 1, (2020), 233-239. https://doi.org/10.1016/j.matpr.2020.05.536
  13. Vahdat, A., Ghasemi, B., Yousefpour, M., "Mechanical properties of the hydroxyapatite and magnetic nanocomposite of hydroxyapatite adsorbents", South African Journal of Chemical Engineering, Vol. 33, (2020), 90-94. https://doi.org/10.1016/j.sajce.2020.05.007
  14. Diganta, G., Shanmugamani, A. G., Rao, S. V. S., Kumar, T., Sinha. P. K., "Studies on removal of cobalt from an alkaline waste using synthetic calcium hydroxyapatite", Journal of Radioanalytical and Nuclear Chemistry, Vol. 298, No. 1, (2013), 337-344. https://doi.org/10.1007/s10967-012-2378-6
  15. Selvam, S., Vasantharaj, S., LewisOscar, F., Selvaraj, R., Brindhadevi, K., Pugazhendhi, A., "Natural organic and inorganic–hydroxyapatite biopolymer composite for biomedical applications", Progress in Organic Coatings, Vol. 147 (2020), 105858. https://doi.org/10.1016/j.porgcoat.2020.105858
  16. Hench, L. L., "Bioceramics: From concept to clinic", Journal of American Ceramic Society, Vol. 74, (1991), 1487-1510. https://doi.org/10.1016/j.porgcoat.2020.105858
  17. Ge, Z., Baguenard, S., Lim, L. Y., Wee, A., Khor, E., "Hydroxyapatite chitin materials as potential tissue engineered bone substitutes", Journal of Biomaterials, Vol. 25, (2014), 1049-1058. https://doi.org/10.1016/S0142-9612(03)00612-4
  18. Jarcho, M., Bolen, C. H., Thomas, M. B., Bobick, J., Kay, J. F., Doremus, R. H., "Hydroxylapatite synthesis and characterization in dense polycrystalline form", Journal of Materials Science, Vol. 11, (1976), 2027-2035. https://doi.org/10.1007/BF02403350
  19. Abhinav S., Kakimoto K. I., Kumar-Dubey A., "Polarization induced dielectric and electrical response of electrovector hydroxyapatite and ferroelectric sodium potassium niobate ceramics", Journal of Physics D: Applied Physics, Vol. 53, No. 39, (2020), 395402. https://doi.org/10.1088/1361-6463/ab946d
  20. Mitchell, C., Kennard, R., Roozbahani, S., Min-Kim, S., Kukk, K., Mason, M.. "One-step hydrothermal synthesis with in situ milling of biologically relevant hydroxyapatite", Materials Science and Engineering: C, Vol. 113, (2020), 110962. https://doi.org/10.1016/ j.msec.2020.110962
  21. Umit, E., Dogan, M., Aysegul, U., Serdar-Baglar, M., Mustafa, B., Turk, M., Nezir, S., "Hydroxyapatite-based nanoparticles as a coating material for the dentine surface: An antibacterial and toxicological effect", Ceramics International, Vol. 46, No. 1 (2020), 270-280. https://doi.org/10.1016/j.ceramint.2019.08.260
  22. Singha, B., Bar, N., Das, S. K., "The use of artificial neural network (ANN) for modeling of Pb (II) adsorption in batch process", Journal of Molecular Liquids, Vol. 211, No. 2, (2015), 228-232. https://doi.org/1016/j.molliq.2015.07.002
  23. Dean-Mo, L.,Troczynski, Tseng, J. W., "Water-based sol–gel synthesis of hydroxyapatite: Process development", Bioaterials, Vol. 22, No. 13, (2001), 1721-1730. https://doi.org/10.1016/S0142-9612(00)00332-X
  24. Wen, H. B., Van den Brink, J., De Wijn, J. R., Cui, F. Z., De Groot, K., "Crystal growth of calcium phosphate on chemically treated titanium", Journal of Crystal Growth, Vol. 186, No. 4, (1998), 616-623. https://doi.org/10.1016/S0022-0248 (97)00824-5
  25. Marliana, A., Fitriani, E., Ramadhan, F., Suhandono, S., Yuliani, K., Windarti, T., "Synthesis and characterization of hydroxyapatite from fish bone waste", Proceedings of AIP Conference, AIP Publishing LLC, Vol. 1699, No. 1, (2015), 040006. https://doi.org/10.1063/1.4938321
  26. Ng, C. K., Ng, Z. L., Ramesh, S., Tan, C. Y., Ting, C. H., Chuah, Y. D., Sutharsini, U., "Synthesis and properties of bio‐waste‐based hydroxyapatite via hydrothermal process", Materialwissenschaft und Werkstofftechnik, Vol. 51, No. 6, (2020), 706-712. https://doi.org/10.1002/mawe.202000010
  27. Nguyen Kim, N., Nguyen Thi, T. C., Pham Hung, V., "Facile synthesis of hydroxyapatite nanoparticles mimicking biological apatite from eggshells for bone-tissue engineering", Colloids and Surfaces B: Biointerfaces, Vol. 172, (2018), 769-778. https://doi.org/10.1016/j.colsurfb.2018.09.039
  28. Hudson, A. B., Silva, N. F., Lisboa, M. H., Costa, F. M. C., "Modeling and optimization of combustion synthesis for hydroxyapatite production", Ceramics International, Vol. 46, No. 8, (2020), 11638-11646. https://doi.org/10.1016/j.ceramint.2020.01.194
  29. Ratna Sunila, B., Agannathamb, M. J., "Producing hydroxyapatite from fish bones by heat treatment", Materials Letters, Vol. 185, (2016), 411-414. https://doi.org/10.1016/j.matlet.2016.09.039
  30. Rayat Roknabadi, F., Monshi, A., Mirjalili, F., "Investigating the effect of adding natural nano crystalline hydroxyapatite on microstructure and mechanical properties of sorel cement", Advanced Processes In Materials Engineering, Vol. 9, No. 1, (2015), 107-117. http://ma.iaumajlesi.ac.ir/article_511096.html
  31. Chehkandi, B., Chehkandi, M., "Improving the purity of hydroxyapatite nanopowders synthesized using sol-gel process", Nanomaterials, Vol. 3, No. 7, (2011) 16-22. (In Farsi). https://www.sid.ir/fa/journal/ViewPaper.aspx?id=209158
  32. Younesi M., Javidi, M., Fooladfar, H. R., "Production of biocompatible ceramic hydroxyapatite from bone ash and investigation of the effect of production process temperature on fuzzy purity and its chemical composition", New Processes in Materials Engineering, Vol. 2, No. 7, (2008), 68-63. (In Farsi). https://www.sid.ir/fa/journal/ViewPaper.aspx?id=116331

 

 

Journal of Advanced Materials and Technologies
Volume 10, Issue 3
Autumn 2021
Pages 25-33

  • Receive Date 11 November 2020
  • Revise Date 25 January 2021
  • Accept Date 20 October 2021