Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade

Akbari Jouchi, Abbas; Pourrajabian, Abolfazl; Rahgozar, Saeed; Dehghan, Maziar

doi:10.30501/jamt.2020.228466.1087

Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade

Document Type : Original Reaearch Article

Authors

Abbas Akbari Jouchi ¹

Abolfazl Pourrajabian ²

Saeed Rahgozar ²

Maziar Dehghan ²

¹ M. Sc. Student, Department of Energy, Materials and Energy Research Center (MERC), MeshkinDasht, Alborz, Iran

² Assistant professor, Department of Energy, Materials and Energy Research Center (MERC), MeshkinDasht, Alborz, Iran

10.30501/jamt.2020.228466.1087

Abstract

Regarding the suitable potential for wind energy in Iran, it is possible to employ small wind turbines such as large ones to supply part of the electricity load of the country. The present study deals with materials used in small horizontal axis wind turbine blades and their fabrication methods. To this end, the wood and the composite, as the two main materials used in blades, have been investigated. Then, the main methods of producing wooden and composite blades have been analyzed. Finally, the 3D printing method and polymer materials used in this technique have been introduced. The study shows that the fatigue parameter has an important role in determining the blade’s material and the fabrication method. Despite the environmental benefits of using wood, the complexity and the manufacturing costs prevent rapid and affordable production of wooden blades. On the other hand, the mass production of composite blades is more economical, although it has environmental impacts. Despite the fatigue issue of the 3D printed blades, the 3D printing method is a fast and relatively inexpensive technique for fabrication of small wind turbine models for wind tunnel tests.

Keywords

Small wind turbine

Blade

Composite

Wood

Fabrication method

Lakshmi, G. S., Rathore, G. S., Sharma, R., Anand, A., Sharma, S., Hada, A. S., Energy statistics, (2017). Available at: https://smartnet.niua.org/sites/default/files/resources/energy_statistics_2017r.pdf.pdf, (Accessed: 11 Dec. 2018).
Miller, L. M., Gans, F., Kleidon, A., "Estimating maximum global land surface wind power extractability and associated climatic consequences", Earth system dynamics, Vol. 2, No. 1, (2011), 1-12. https://doi.org/10.5194/esd-2-1-2011
Appavou, F., Brown, A., Epp, B., Leidreiter, A., Lins, C., Murdock, H. E., Musolino, E., Petrichenko, K., Farrell, T. C., Krader, T. T., Tsakiris, A., Renewables 2017 global status report, REN21, Renewable Energy Policy Network for the 21^st Century, REN21 Secretariate, Paris, (2017). Available at: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwih4vW36bDxAhV3_7sIHU_aAq0QFjADegQIAxAD&url=https%3A%2F%2Fwww.ren21.net%2Fwp-content%2Fuploads%2F2019%2F05%2FGSR2017_Full-Report_English.pdf&usg=AOvVaw0tL-6lnsf9PxZLiihDzPWB, (Accessed: 20 Dec. 2018).
Hales, D., Renewables 2018-gobal status report, REN21, Renewable Energy Policy Network for the 21^st Century, REN21 Secretariate, Paris, (2018). Available at: https://www.energia.org/renewables-2018-global-status-report-ren21/, (Accessed: 10 Jan. 2019).
Small wind turbine market, Available at: https://www.mordorintelligence.com/industry- reports/small-wind-turbine-market, (Accessed: 11 Jan. 2019).
Mohammadi, K., Mostafaeipour, A., Sabzpooshani, M., "Assessment of solar and wind energy potentials for three free economic and industrial zones of Iran", Energy, Vol. 67, (2014), 117-128. https://doi.org/10.1016/j.energy.2014.02.024
Pourrajabian, A., Mirzaei, M., Ebrahimi, R., Wood, D., "Effect of air density on the performance of a small wind turbine blade: A case study in Iran", Journal of Wind Engineering and Industrial Aerodynamics, Vol. 126, (2014), 1-10. https://doi.org/10.1016/j.jweia.2014.01.001
Pourrajabian, A., Ebrahimi, R., Mirzaei, M., "Applying micro scales of horizontal axis wind turbines for operation in low wind speed regions", Energy Conversion and Management, Vol. 87, (2014), 119-127. https://doi.org/10.1016/j.enconman.2014.07.003
Giguère, P., Selig, M. S., "New airfoils for small horizontal axis wind turbines", Journal of Solar Energy Engineering, Vol. 120, No. 2, (1998), 108. https://doi.org/10.1115/1.2888052
Pourrajabian, A., Afshar, P. A. N., Mirzaei, M., Ebrahimi, R., Wood, D. H., "Hollow blades for small wind turbines operating at high altitudes", Journal of Solar Energy Engineering, Vol. 138, No. 6, (2016). https://doi.org/10.1115/1.4034333
Wood, D., Small Wind Turbines, Springer, London, (2012). https://doi.org/10.1007/978-1-84996-175-2
Manwell, J. F., McGowan, J. G., Rogers, A. L., Wind Energy Explained: Theory, Design and Application, John Wiley & Sons, (2010). https://doi.org/10.1002/9781119994367
Bechly, M. E., Clausen, P. D., "Some dynamic strain measurements from the blade of a small wind turbine", Wind Engineering, Vol. 23, No. 1, (1999), 15-22. Available at: https://www.jstor.org/stable/43749720, (Accessed: 11 July 2019).
Pourrajabian, A., Afshar, P. A. N., Ahmadizadeh, M., Wood, D., "Aero-structural design and optimization of a small wind turbine blade", Renewable Energy, Vol. 87, (2016), 837-848. https://doi.org/10.1016/j.renene.2015.09.002
Shigley, J. E., Mischke, C. R., Mechanical Engineering Design, McGraw-Hill. Inc, Singapore, (1989). https://www.amazon.com/Mechanical-engineering-design-McGraw-Hill-mechanical/dp/007056888X
Burton, T., Sharpe, D., Jenkins, N., Bossanyi, E., Wind Energy Handbook, John Wiley & Sons, (2001). https://books.google.com/books/about/Wind_Energy_Handbook.html?id=XFYrEAAAQBAJ&printsec=frontcover&source=kp_read_button
Peterson, P., Clausen, P. D., "Timber for high efficiency small wind turbine blades", Wind Engineering, Vol. 28, No. 1, (2004), 87-96. https://doi.org/10.1260%2F0309524041210865
Ross, R. J., Wood Handbook : Wood as an Engineering Material, Madison, (2010). https://doi.org/10.2737/FPL-GTR-113
Astle, C., Burge, I., Chen, M., Herrler, T., Kwan, L., Zibin, N., Wood, D., "Timber for small wind turbine blades", Energy for Sustainable Development, Vol. 17, No. 6, (2013). https://doi.org/10.1016/j.esd.2013.03.001
Gurit Holding, A. G., Guide to Composites, (2000). https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjZjrnm6LDxAhX1g_0HHVAmDz0QFjAAegQIBBAD&url=https%3A%2F%2Fwww.gurit.com%2F-%2Fmedia%2FGurit%2FDatasheets%2Fguide-to-composites.pdf&usg=AOvVaw0I4iUcAlXzhgQzgI24vcVw
Guide to Composites, (2016). Available at: https://composites.ugent.be/home_made_composites/documentation/SP_Composites_Guide.pdf, (Accessed: 15 July 2019).
Kaw, A., Mechanics of Composite Mterials, CRC Press, (2005). https://books.google.com/books?id=MwHLBQAAQBAJ&printsec=frontcover&dq=Mechanics+of+Composite+Materials+kaw+A+2005&hl=en&sa=X&ved=2ahUKEwiQo_bW57DxAhU0hf0HHWFlAjEQ6AEwAXoECAoQAg#v=onepage&q=Mechanics%20of%20Composite%20Materials%20kaw%20A%202005&f=false
Kaw, A., "Macromechanical analysis of a lamina Tsai‐Wu failure theory", (2015). https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjknvyB6LDxAhWWgP0HHfmOBioQFjAAegQIBBAD&url=http%3A%2F%2Fwww.eng.usf.edu%2F~kaw%2FcompositesOCW%2Fppts%2Fchapter2_revised%2FChapter2_8_6_tsaiwu%2520failure%2520theory.pdf&usg=AOvVaw1WxLpX6i6B4KT9ucVOPuRY
Thomsen, O. T., "Sandwich materials for wind turbine blades-Present and future", Journal of Sandwich Structures and Materials, Vol. 11, No. 1, (2009), 7-26. https://doi.org/10.1177%2F1099636208099710
Mandri, G., "Blade manufacturing of small wind turbine within the Moroccan context", (2016). https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjpjtWb6LDxAhWT_7sIHZA8BjwQFjAAegQIBBAD&url=https%3A%2F%2Fwww.researchgate.net%2Fprofile%2FLorenzo_Berto2%2Fpost%2FWhat_kind_of_materials_and_processes_are_involved_in_small_scale_VAWT_blades_manufacturing_How_to_give_an_early_estimate_of_the_costs%2Fattachment%2F5a267d27b53d2f0bba41c6e0%2FAS%253A568162263330816%25401512471847497%2Fdownload%2Fblade%2Bmanufacturing%2Bof%2Bsmall%2Bwind%2Bturbine%2Bwithin%2Bthe%2Bmoroccan%2Bcontext.pdf&usg=AOvVaw1Cz-Wwl6-WLbxr8V6dQaqh
Gibson, I., Rosen, D., Stucker, B., Khorasani, M., Additive Manufacturing Technologies, Springer, New York, (2014). https://doi.org/10.1007/978-3-030-56127-7
Bandyopadhyay, A., Bose, S., Additive Manufacturing, CRC Press, (2015). https://books.google.com/books?id=70W4DwAAQBAJ&dq=Additive+Manufacturing+Bandyopadhyay,+A.,+Bose,+S.,&hl=en&sa=X&ved=2ahUKEwjT-Jji5rDxAhVwgP0HHRMxA_4Q6AEwAHoECAgQAg
Gebhardt, A., Hötter, J. S., Additive Manufacturing 3D Printing for Prototyping and Manufacturing, Carl Hanser Verlag, München, (2016). https://books.google.com/books/about/Additive_Manufacturing.html?id=nu-gDAAAQBAJ&source=kp_book_description
Tymrak, B. M., Kreiger, M., Pearce, J. M., "Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions", Materials & Design, Vol. 58, No. 2, (2014), 242-246. https://doi.org/10.1016/j.matdes.2014.02.038
Akour, S. N., Al-Heymari, M., Ahmed, T., Khalil, K. A., "Experimental and theoretical investigation of micro wind turbine for low wind speed regions", Renewable Energy, Vol. 116, (2018), 215-223. https://doi.org/10.1016/j.renene.2017.09.076
Pourrajabian, A., Dehghan, M., Javed, A., Wood, D., "Choosing an appropriate timber for a small wind turbine blade: A comparative study". Renewable and Sustainable Energy Reviews, Vol. 100, (2019), 1-8. https://doi.org/10.1016/j.rser.2018.10.010