@article { author = {Yousefzadeh, Samira}, title = {Supercapacitive properties of graphitic-carbon nitride deposited on reduced titanium dioxide porous nanostructured substrate}, journal = {Journal of Advanced Materials and Technologies}, volume = {7}, number = {3}, pages = {19-24}, year = {2018}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2018.91738}, abstract = {In this study, graphitic carbon nitride (g-C3N4) was made by thermal condensation of melamine at 450 and 550 °C. Moreover, the TiO2 porous nanostructured electrode was fabricated as a substrate for the g-C3N4 deposition by anodization method on a titanium foil (Ti) and then, reduced by electrochemical method to improve electrical conductivity (Re-TiO2 NP). The graphite carbon nitride layers were deposited on the porous nanostructured electrode (Re-TiO2 NP/Ti) by electrophoretic technique and the g-C3N4/Re-TiO2 NP/Ti electrodes were used as supercapacitor electrode. Comparison of the supercapacitive properties of the g-C3N4/Re-TiO2 NP/Ti electrodes showed that the electrochemical efficiency and specific capacitance of the g-C3N4 (450)/Re-TiO2 NP/Ti electrode is higher than the g-C3N4 (550)/Re-TiO2 NP/Ti electrode due to the increased active sites and charge transfer and the enhanced hydrophilicity as result of its high nitrogen content.}, keywords = {Supercapacitor,Reduced TiO2 porous nanostructured electrode,graphitic-Carbon Nitride,Specific capacitance}, title_fa = {خواص ابرخازنی نیترید کربن گرافیتی لایه نشانی شده بر روی بستر نانوساختارهای متخلخل دی اکسید تیتانیوم احیا شده}, abstract_fa = {در این مطالعه، نیترید کربن گرافیتی (g-C3N4) از چگالش گرمایی ملامین در دو دمای 450 و 550 درجه سانتیگراد ساخته شد. همچنین، الکترود نانوساختارهای متخلخل دی اکسید تیتانیوم (TiO2 NP) به عنوان بستر برای لایه نشانی g-C3N4 با روش آندیزاسیون بر روی فویل تیتانیوم (Ti) ساخته شد و سپس برای بهبود رسانندگی الکتریکی به روش الکتروشیمیایی احیا گردید. لایه نیترید کربن گرافیتی به روش الکتروفورتیک بر روی الکترود نانوساختارهای متخلخل احیا شده (Re-TiO2 NP/Ti)  لایه نشانی گردید و الکترود نانوساختارهای متخلخل دی اکسید تیتانیوم احیا شده/نیترید کربن گرافیتی (g-C3N4/Re-TiO2 NP/Ti)  حاصل به عنوان الکترود ابرخازنی مورد استفاده قرار گرفت. مقایسه­ی خواص ابرخازنی الکترودهای (g-C3N4/Re-TiO2 NP/Ti) نشان داد که بازده الکتروشیمیایی و ظرفیت ویژه الکترود g-C3N4(450)/Re-TiO2 NP/Ti نسبت به الکترودg-C3N4(550)/Re-TiO2 NP/Ti بیشتر است که این پدیده، به دلیل مقادیر بالای نیتروژن و در نتیجه، افزایش سایت­های فعال، افزایش انتقال بار و آبدوستی در الکترود g-C3N4(450)/Re-TiO2 NP/Ti می­باشد.}, keywords_fa = {ابرخازن,الکترود نانوساختارهای متخلخل احیا شده دی اکسید تیتانیوم,نیترید کربن گرافیتی,ظرفیت ویژه}, url = {https://www.jamt.ir/article_91738.html}, eprint = {https://www.jamt.ir/article_91738_242fcc1d36efc3e852cf8aa65a3df06d.pdf} }