@article { author = {Mahmoudi, Shirin and Eshraghi, Mohamad Javad and Yarmand, Benyamin and Naderi, Nima}, title = {Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells}, journal = {Journal of Advanced Materials and Technologies}, volume = {8}, number = {1}, pages = {65-71}, year = {2019}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2019.88951}, abstract = {In this study, the effect of phosphorous concentration has been investigated on performance of porous silicon solar cells. For this purpose, silicon substrates were etched into aqueous etching solution containing hydrofluoric acid / hydrogen peroxide with molar ratios 0.82, 0.87 and 0.89 via metal-assisted chemical etching. Surface characteristics were studied by optical microscopy, field-emission electron microscopy and antireflection analysis. In the following, solar cells were fabricated by phosphorous diffusion into optimized porous silicon substrate which phosphorous concentrations had values of 3%, 9%, and 15%. The result presented that in 0.82 molar ratio, the etched silicon had uniform porosities whose sizes were nearly to Ag nano-particles. The reflectance of this substrate was decreased to 11% and was the best substrate for absorbing incident light. Survey of fabricated solar cell performance showed 98% increasing of short circuit current in the solar cell which was made by P2O5 3%. This concentration due to is near the solubility of phosphorous in silicon, caused the increasing efficiency to 10.6%.}, keywords = {porous Silicon,Phosphorous,Metal-assisted chemical etching,Solid State Solar Cells}, title_fa = {بررسی تاثیر غلظت فسفر بر عملکرد سلول‌های خورشیدی حالت جامد پایه سیلیکون متخلخل}, abstract_fa = {در پژوهش حاضر، تاثیر غلظت فسفر در محلول آلاینده بر عملکرد سلول­های خورشیدی حالت جامد پایه سیلیکون متخلخل مورد بررسی قرار گرفت. برای این منظور بسترهای سیلیکونی به روش حکاکی شیمیایی توسط نقره و با استفاده از محلول حکاکی آبی حاوی هیدروفلوریک اسید و هیدروژن ­پروکسید به نسبت­ های 82/0، 87/0 و 89/0 حکاکی شدند و خصوصیات نوری و سطحی آن­ها به ترتیب توسط بازتاب­ سنجی و میکروسکوپ ­های نوری و الکترونی روبشی گسیل میدانی مورد ارزیابی قرار گرفتند. در ادامه، سلول­های خورشیدی با نفوذ فسفر در سه غلظت 3%، 9% و 15% در محلول آلاینده به درون بستر سیلیکونی با تخلخل بهینه ساخته شدند. نتایج مشخص کرد که سیلیکون حکاکی شده با هیدروفلوریک اسید و هیدروژن پروکسید به نسبت 82/0 به دلیل برخورداری از تخلخل­ های یکنواخت و با اندازه نزدیک به ذرات  نقره دارای بازتابی در حدود 11% شد که بهترین بستر برای جذب حداکثر میزان نور برخوردی به شمار می­رود. بررسی عملکرد فوتوولتاییک سلول­های ساخته شده بیانگر افزایش 98% جریان مدار کوتاه سلول آلایش یافته با غلظت 3% از فسفر است که بازده کل سلول را به میزان 6/10% افزایش داده است.}, keywords_fa = {سیلیکون متخلخل,فسفر,حکاکی شیمیایی توسط فلز و سلول خورشیدی حالت جامد}, url = {https://www.jamt.ir/article_88951.html}, eprint = {https://www.jamt.ir/article_88951_ef006280b7c28c89c6767e6961e70a7a.pdf} }