@article { author = {Jahangiri, Z. and Palizdar, Y. and Molaei, M. J. and Kolahi, A.}, title = {The Effect of Austenite Grain Size on the Microstructure of the Medium Carbon Nanobainitic Steel}, journal = {Journal of Advanced Materials and Technologies}, volume = {7}, number = {4}, pages = {25-36}, year = {2019}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2019.84322}, abstract = {Carbide free bainitic steel, so called supper bainitic or nano-structured bainitic steel has attracted considerable attentions due to its remarkable combination of strength and ductility. Unfortunately, the effect of prior austenite grain size has not been investigated for the low carbon nano-structured bainitic steels. In this research, attempts were made to understand the effect of prior austenite grain size effect on the microstructure of carbide free medium carbon bainitic steel. The steel was cast by using induction furnace under argon gas atmosphere. The ingot was electro-slag-remelted (ESR) to obtain clean steel followed by hot rolling.}, keywords = {Nano-structured bainitic steel,prior austenite grain size,Austempering treatment,Microstructure,tensile strength}, title_fa = {بررسی تاثیر اندازه دانه آستنیت اولیه بر ساختار فولادهای نانو‌ساختار بینیتی کربن متوسط}, abstract_fa = {در سال‌های اخیر فولادهای بینیتی نانوساختار، به دلیل دارا بودن ترکیب مناسبی از استحکام و انعطاف‌پذیری، توسعه یافته‌اند. تاثیر پارامترهای موثری نظیر زمان و دمای استحاله هم دما و هم چنین ترکیب شیمیایی بر تعیین خواص نهایی این فولادها مورد تحقیق گسترده قرار گرفته است. این در حالی است که تاثیر پارامتر اندازه دانه آستنیت اولیه هنوز به صورت گسترده در فولادهای نانوساختار بینیتی با کربن پایین مورد بررسی قرار نگرفته و تاثیر ریز دانه بودن آستنیت اولیه بر خواص نهایی مورد سوال است. هدف از این پژوهش، بررسی نقش اندازه دانه آستنیت اولیه بر ریزساختار نهایی و خواص مکانیکی فولادهای بینیتی نانوساختار با کربن متوسط است. در این تحقیق، پس از تعیین ترکیب فولاد مورد نظر، ذوب و ریخته‌گری آن در کوره القایی انجام شد و پس از عملیات ذوب مجدد تحت سرباره الکتریکی (ESR)، تحت عملیات نورد گرم قرار گرفت.}, keywords_fa = {فولادهای بینیتی نانوساختار,اندازه دانه آستنیت اولیه,عملیات آستمپر,ریزساختار,استحکام کششی}, url = {https://www.jamt.ir/article_84322.html}, eprint = {https://www.jamt.ir/article_84322_6d8d0e1605ae5cb65ccdd3cbe390adf2.pdf} }