@article { author = {Gholampour, Mahdi and Movassagh-Alanagh, Farid and Salimkhani, Hamed}, title = {Synthesis of the Microwave Absorber Fe3O4/CFs Nanocomposite Via Electrophoretic Deposition With a Wide Effective Absorption Bandwidth}, journal = {Journal of Advanced Materials and Technologies}, volume = {6}, number = {3}, pages = {17-26}, year = {2017}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2017.70368}, abstract = { In this study, the structural, magnetic and microwave absorption properties of a microwave absorbercomposite fabricated through electrophoretic deposition (EPD) of Fe3O4 nano-particles on carbon fibers (CFs) werestudied. Firstly, co-precipitation method was employed to synthesize the Fe3O4 nano-particles. Then, these assynthesized Fe3O4 nano-particles were successfully deposited on CFs using a modified EPD process. The measuredmagnetic properties of the as-synthesized Fe3O4 nano-powder and the Fe3O4/CFs nano-composite showed that thesaturation magnetization of the bare Fe3O4 was decreased from 72.3 to 33.1 emu/g for the Fe3O4/CFs nano-compositeand also its corecivity was increased from 4.9 to 168 Oe for the nano-composite. The results of reflection loss (RL)measurements in the 8.2- 12.4 GHz frequency range indicated that the RL of Fe3O4/CFs nano-composites aresignificantly influenced by their thickness. The maximum RL value of -10.2 dB at 10 GHz with an effective absorptionbandwidth about 2 GHz was obtained for the sample with the thickness of 2 mm }, keywords = {Carbon Fibers,Microwave absorption,nano-composite,Fe3O4 nano-particles}, title_fa = {ساخت نانوکامپوزیت ذرات مگنتیت/الیاف کربنی به روش رسوبدهی الکتروفورتیک به عنوان جاذب امواج مایکروویو با باند بسامدی جذب موثر پهن}, abstract_fa = { در این تحقیق به بررسی خواص ساختاری، مغناطیسی و جذب امواج مایکروویو نانوکامپوزیت های جاذب ساخته شده از طریـق پوشـش دهـی الیـافکربنی ) (CFsبا نانوذرات مگنتیت ) (Fe3O4نوسط رسوب دهی الکتروفورتیک ) (EPDبهبود یافته، پرداخته شده است. ابتدا نانوذرات مگنتیـت بـه روش هـم رسـوبیتهیه شده و سپس به وسیله ی فرآیند رسوب دهی الکتروفورتیک بهبود یافته روی CFsپوشش داده شد. بررسی خواص مغناطیسی نشان داد کـه مقـادیر مغنـاطشاشباع و وادارندگی نانوپودر مگنتیت پس از انجام فرآیند رسوب دهی الکتروفورتیک به ترتیـب از 72,3بـه 33,1 emu/g از 4,9بـه 168 Oe بـرای نانوکامپوزیـتمگنتیت/الیاف کربنی می رسد. نتایج آزمون جذب امواج مایکروویو در محدوده ی بسـامدی 8,2تـا 12,4 GHzنشـان داد کـه میـزان جـذب مـوج نانوکامپوزیـتمگنتیت/الیاف کربنی به شدت به ضخامت آن بستگی دارد. مقدار بیشینه ی جذب موجی در حدود -10,2 dBدر 10 GHzبا پهنای باند جـذب مـوثری در حـدود2 GHzبرای نمونه ی با ضخامت 2 میلیمتر به دست آمد }, keywords_fa = {الیاف کربنی,جذب امواج مایکروویو,نانوکامپوزیت,نانوذرات مگنتیت}, url = {https://www.jamt.ir/article_70368.html}, eprint = {https://www.jamt.ir/article_70368_fada8f984a056a8186735dfa03550207.pdf} }