@article { author = {Khameneh Asl, Shahab and Ebrahimi, Mehdi}, title = {Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based}, journal = {Journal of Advanced Materials and Technologies}, volume = {6}, number = {2}, pages = {79-85}, year = {2017}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2017.70365}, abstract = {Al-Cu alloys have extensive applications in the production of many industries. In this paper, the effects of both copper content and cold work amount on the microstructure and aging behavior of the alloys studied. The mechanical and microstructural parameters determined by using Vickers hardness and transmission electron microscopy, the present study is dealing with the variation of hardness and microstructure as a result of different copper contents and cold work amounts performed on Al-Cu alloys samples which has done solution heat treatment, cold worked and aged in different time intervals. The results indicate that for based samples, density and thickness of θ' precipitates increased by increasing copper concentration. Precipitation behavior of the 80% cold rolled samples was completely different from that of other samples and the nucleation of the equilibrium θ phase commenced prior to the precipitation of the metastable θ' phase. Moreover the thickness of precipitates was observed to be more than that for samples which were not cold worked. As a result, regarding the various microstructures produced by aging processes, one may choose an appropriate combination of copper content and cold work amount according to the desired application.}, keywords = {Al-Cu Alloys,Cold work,Precipitation,Microstructure,TEM,aging}, title_fa = {بررسی اثر تغییر غلظت مس و کارسرد بر ریزساختار و رفتار پیرسازی آلیاژهای برپایه آلومینیوم}, abstract_fa = {آلیاژهای Al-Cu به علت نسبت استحکام به وزن بالا و مقاومت به خستگی نسبی خوب، کاربردهای بسیار گسترده‌ای در صنایع مختلف دارئد. در این تحقیق، نمونه‌هایی با غلظت های متفاوت مس که بر روی آنها به‌ترتیب عملیات محلول ‌سازی، کارسرد و سپس پیرسازی در مدت زمان‌های مختلف انجام شده مورد بررسی قرار گرفت. بررسی‌های ریز‌ساختاری و خواص مکانیکی نمونه‌ها با استفاده از آزمون سختی‌سنجی ویکرز و میکروسکوپ الکترونی عبوری انجام شد. نتایج حاصله ارتباط معنا‌داری بین عملیات حرارتی اعمال شده، ریزساختار و خواص مکانیکی نشان می‌دهد به‌طوری‌که در نمونه‌هایی با درصدهای وزنی مس بیشتر از 2/1، رسوب-های 'θ تشکیل شده در اثر پیرسازی مشهود می‌باشد. نتایج میکروسکوپی الکترونی عبوری نشان می‌دهد که رسوب‌گذاری در نمونه‌های80 درصد کارسرد شده به‌طور کامل متفاوت با نمونه‌های دیگر بوده و در اثر پیرسازی جوانه‌زنی فاز پایدار θ قبل از رسوب‌گذاری فاز شبه‌پایدار 'θ اتفاق می‌افتد. هم‌چنین مشاهده گردید که رسوب-های'θ تشکیل شده در این نمونه در مقایسه با نمونه کارسرد نشده دارای ضخامت بیشتری می‌باشند. بدین ترتیب امکان انتخاب عمیات حرارتی مناسب برای رسیدن به بهینه خواص میسر شد.}, keywords_fa = {آلیاژAl,Cu,کارسرد,پیرسازی,رسوب,ریزساختار,میکروسکوپی الکترونی عبوری}, url = {https://www.jamt.ir/article_70365.html}, eprint = {https://www.jamt.ir/article_70365_7903c47c626ff1bb56ab91c3cb8972d8.pdf} }