@article { author = {Panahi, Fateme and Rabiee, Sayed Mahmood and Ghaffari, Somayeh and Shidpoor, Reza}, title = {Effect of Chitosan Polymer on Structural and Setting Properties Calcium Silicate Based on Dental Cement}, journal = {Journal of Advanced Materials and Technologies}, volume = {5}, number = {4}, pages = {45-52}, year = {2017}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2637.70347}, abstract = {In recent years, cement composites based on calcium silicate have been more generally considered for medical applications. Calcium silicate Cement are among the categories that are used in dental root canal treatment. The aim of this study is to make new calcium silicate cement to preserve and strengthen desirable properties of this type of cements. In this study, composite dental cement based on calcium silicate was prepared. Then effect of adding biodegradable and biocompatible polymer such as chitosan on setting properties and its structure were studied. In this study, a combination of calcium silicate, dicalcium phosphate (DCP) and bismuth oxide (Bi2O3) as powder phase and 2% solution of the chitosan dissolved in 1% acetic acid solution as liquid phase, was used. As well as control sample was obtained by mixing the powder with distilled water as the liquid phase. Based on the obtained results, setting time of composite cement was changed from 51 to 67 minutes by adding chitosan polymer. Presence of chitosan also reduced the compressive strength a little. the bioactivity of the cement were studied in a solution of simulated body (SBF) for 14 days. the samples were analyzed by SEM to identify the microstructure and by XRD to determine crystal structure. The composition of cement before incubation in SBF was included early phases (phase calcium silicate and calcium phosphate) that after 14 days of immersion in SBF, they were converted to layer-shaped hydroxy apatite and the presence of chitosan had not any influence on the final phase of hydroxy apatite.}, keywords = {Composite,Calcium silicate cement,Chitosan,Dental cement,apatite}, title_fa = {اثر افزودن پلیمر کیتوسان برخواص ساختاری و گیرشی سیمان دندانی بر پایه کلسیم سیلیکات}, abstract_fa = {در سال‌های اخیر کامپوزیت‌های سیمانی بر پایه کلسیم‌سیلیکات‌ها برای کاربردهای پزشکی مورد توجه قرار گرفته‌اند. سیمان‎های کلسیم سیلیکاتی جزء دسته سیمان‎هایی هستند که در ترمیم ریشه دندان استفاده می‌شوند. هدف از انجام این پژوهش تهیه سیمان کامپوزیتی کلسیم‌سیلیکاتی جدیدی جهت حفظ و تقویت خواص مطلوب این سیمان‌ها می‌باشد. در این تحقیق، کامپوزیت سیمان دندانی بر پایه کلسیم سیلیکات تهیه گردید و اثر افزودن پلیمر زیست‌ تخریب‌پذیر و زیست‌سازگار کیتوسان بر خواص گیرشی و ساختاری آن مورد بررسی قرار گرفت. در این پژوهش از ترکیب کلسیم سیلیکاتی، دی‌کلسیم فسفات(DCP) و اکسید بیسموت(Bi2O3) به عنوان فاز پودری و از پلیمر کیتوسان به صورت محلول 2% حل شده در اسید استیک 1% به عنوان فاز مایع، استفاده گردید. هم‌چنین نمونه کنترل از طریق مخلوط کردن فاز پودری با آب مقطر به عنوان فاز مایع به‌دست آمد. براساس نتایج به‌دست آمده، با افزودن پلیمر کیتوسان، زمان گیرش سیمان کامپوزیتی از 51 دقیقه به 67 دقیقه تغییر یافت. هم‌چنین حضور کیتوسان باعث کاهش جزئی استحکام فشاری گردید. میزان زیست‌فعالی این سیمان‎ها به مدت 14 روز در محلول شبیه سازی بدن(SBF ) مورد بررسی قرار گرفت. نمونه‎ها در قبل و بعد از غوطه‎وری در محلول SBF، توسط دستگاه SEM مورد بررسی ریزساختاری و توسط دستگاه XRD مورد شناسایی فازی قرار گرفتند. ترکیب سیمان در قبل از غوطه‌وری شامل فازهای اولیه (فازهای کلسیم‌سیلیکاتی و کلسیم‌فسفاتی) بود که با گذشت 14روز غوطه‌وری در محلولSBF، به فازهای لایه‌ای شکل هیدروکسی‌آپاتیت تبدیل شدند و افزودن کیتوسان، تاثیری بر تشکیل فاز نهایی آپاتیت نداشته است.}, keywords_fa = {کامپوزیت,سیمان کلسیم سیلیکاتی,کیتوسان,سیمان دندانی,آپاتیت}, url = {https://www.jamt.ir/article_70347.html}, eprint = {https://www.jamt.ir/article_70347_bab8cb7d2649bdc4ef730ec7b44b9686.pdf} }