1. Delmas, C., et al., Lithium batteries: a new tool in solid state chemistry. International Journal of Inorganic Materials, 1999. 1(1) 11-19.
2. Ammundsen, B. and J. Paulsen, Novel Lithium‐Ion Cathode Materials Based on Layered Manganese Oxides. Advanced Materials, 2001. 13(12‐13) 943-956.
3. Whittingham, M.S., Electrical energy storage and intercalation chemistry. Science, 1976. 192(4244) 1126-1127.
4. Needham, S.A., et al., Synthesis and electrochemical performance of doped LiCoO2 materials. Journal of Power Sources, 2007. 174(2) 828-831.
5. Yan, S., et al., Charge and discharge curves: a unique reliable evidence for the electrochemical properties of LiCoO2. Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 2007. 14(5) 473-476.
6. Li, A., et al., Cathode interfacial engineering to enhance cycling stability of rechargeable lithium-ion batteries. Journal of Solid State Chemistry, 2019. 277, 531-537.
7. Ko, Y., et al., Redox Mediators: A Solution for Advanced Lithium–Oxygen Batteries. Trends in Chemistry, 2019. 1(3) 349-360.
8. Zhou, L., et al., Much improved capacity and cycling performance of LiVMoO6 cathode for lithium ion batteries. Journal of Alloys and Compounds, 2008. 457(1) 389-3.
9. Zhu, X.J., et al., Synthesis and performance of lithium vanadium phosphate as cathode materials for lithium ion batteries by a sol–gel method. Journal of Power Sources, 2008. 184(2) 578-582.
10. Cho, J., Y.J. Kim, and B. Park, Novel LiCoO2 cathode material with Al2O3 coating for a Li ion cell. Chemistry of Materials, 2000. 12(12) 3788-3791.
11. Nitta, N., et al., Li-ion battery materials: present and future. Materials Today, 2015. 18(5) 252-264.
12. Tu, J., et al., Enhanced cycling stability of LiMn 2 O 4 by surface modification with melting impregnation method. Electrochimica Acta, 2006. 51(28) 6456-6462.
13. Sobkowiak, A., et al., Understanding and controlling the surface chemistry of LiFeSO4F for an enhanced cathode functionality. Chemistry of Materials, 2013. 25(15) 3020-3029.
14. Yoncheva, M., et al., Carbon-coated nano-sized LiFe1− x Mn x PO4 solid solutions (0≤ x≤ 1) obtained from phosphate–formate precursors. Journal of materials science, 2011. 46(22) 7082-7089.
15. Liu, N., et al., A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes. Nature nanotechnology, 2014. 9(3) 187-192.
16. Lee, W.J., et al., Nitrogen-doped carbon nanotubes and graphene composite structures for energy andcatalytic applications. Chemical Communications, 2014. 50(52) 6818-6830.
17. Fergus, J.W., Recent developments in cathode materials for lithium ion batteries. Journal of Power Sources, 2010. 195(4) 939-954.
18. Xu, B., et al., Recent progress incathode materials research for advanced lithium ion batteries. Materials Science and Engineering, R: Reports, 2012. 73(5) 51-65.
19. Ohzuku, T. and Y. Makimura, Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries. Chemistry Letters, 2001(7) 642-643.
20. Ohzuku, T. and Y. Makimura, Layered Lithium Insertion Material of LiNi1/2Mn1/2O2: A Possible Alternative to LiCoO2 for Advanced Lithium-Ion Batteries. Chemistry Letters, 2001(8) 744-745.
21. Gu, Y.-J., et al., Reduction of the lithium and nickel site substitution in Li1+xNi0.5Co0.2Mn0.3O2 with Li excess as a cathode electrode material for Li-ion batteries. Journal of Alloys and Compounds, 2015. 630, 316-322.
22. Zhao, W., et al., Synthesis of Li-excess layeredcathode material with enhanced reversible capacity for Lithium ion batteries through the optimization of precursor synthesis method. Electrochimica Acta, 2014. 143, 347-356.
23. Ko, M., et al., Considering Critical Factors of Li-rich Cathode and Si Anode Materials for Practical Li-ion Cell Applications. Small (Weinheim an der Bergstrasse, Germany), 2015. 11.
24. Tolouei, A., A. Kaflou, and S. K Sadrnezhaad, Effects of lithium excess and Ni content on the electrochemical performance of Li1 + x (Ni0.45-x Mn0.4Co0.15) O2 lithium-ion cathode materials in stoichiometric state. Materials Research Express, 2019. 6.
25. Jiang, M., et al., Electrochemical and Structural Study of the Layered, "Li-Excess" Lithium-Ion Battery Electrode Material Li[Li 1/9Ni 1/3MnO 2. Chemistry of Materials, 2009. 21, 2733-2745.
26. Dolotko, O., et al., Understanding structural changes in NMC Li-ion cells by in situ neutron diffraction. Journal of Power Sources, 2014. 255, 197-203.
27. Samarasingha, P.B., et al., Development of cathode materials for lithium ion rechargeable batteries based on the system Li(Ni1/3Mn1/3Co(1/3-x)Mx)O2, (M=Mg, Fe, Al and x=0.00 to 0.33). Solid State Ionics, 2014. 268, 226-230.
28. Kim, J.W., et al., Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O2 cathodes. Journal of Power Sources, 2014. 254, 190-197.
29. Yin, K., et al., The effects of precipitant agent on structure and performance of LiNi1/3Co1/3Mn1/3O2 cathode material via a carbonate co-precipitation method. Electrochimica Acta, 2012. 85, 99-103.
30. Kong, J.-Z., et al., Effects of Li source and calcination temperature on the electrochemical properties of LiNi0.5Co0.2Mn0.3O2 lithium-ion cathode materials. Journal of Alloys and Compounds, 2013, 554, 221-226.
31. Xu, Z., et al., Effects of precursor, synthesis time and synthesis temperature on the physical and electrochemical properties of Li(Ni1−x−yCoxMny)O2 cathode materials. Journal of Power Sources, 2014. 248, 180-189.
32. Shaju, K.M., G.V. Subba Rao, and B.V.R. Chowdari, Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries. Electrochimica Acta, 2002. 48(2), 145-151.
33. Mohanty, D., et al., Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0. O2 cathode during high voltage cycling resolved by in situ X-ray diffraction. Journal of Power Sources, 2013. 229, 239-248.
34. Xu, B., et al., Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study. Energy & Environmental Science, 2011. 4(6), 2223-2233.
35. Li, J., et al., Uniform LiNi1/3Co1/3Mn1/3O2 hollow microspheres: Designed synthesis, topotactical structural transformation and their enhanced electrochemical performance. Nano Energy, 2013. 2(6),1249-1260.
36. Xiang, X. and W. Li, Self-directed chemical synthesis of lithium-rich layered oxide Li[Li0.2Ni0.2Mn0.6]O2 with tightly interconnected particles as cathode of lithium ion batteries with improved rate capability. Electrochimica Acta, 2014. 127, 259-265.
37. Yang, Z., et al., K-doped layered LiNi0.5Co0.2Mn0.3O2 cathode material: Towards the superior rate capability and cycling performance. Journal of Alloys and Compounds, 2017, 699, 358-365.
38. Lin, C., et al., Hydrogen peroxide assisted synthesis of LiNi1/3Co1/3Mn1/3O2 as high-performance cathode for lithium-ion batteries. Journal of Power Sources, 2015. 280, 263-271.