@article { author = {Alehdaghi, Hassan and Zirak, Mohammad}, title = {The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode}, journal = {Journal of Advanced Materials and Technologies}, volume = {8}, number = {3}, pages = {71-77}, year = {2019}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2019.99514}, abstract = {As to the crisis of energy in the recent years, devices manufacturing industry must be go toward the optimizing of energy consumption and increment in the lifetime leading to reduce production cost. Organic light emitting diodes (OLED) are one of the modern generations in the lighting industry that have many advantages such as being light and thin, flexibility, ability to be transparent, and easy to fabricate. These devices consist of hole injecting layer/electron and emissive layer. The main role of hole/electron injection layers is injection of charge carriers to emissive layer where electrons and holes recombinate and create photons. In this work we focused on optimization of hole injection in order to increase lifetime of device. We used the different composition of molybdenum oxide (MoOx) and graphene oxide (GO) in hole injection layer. The maximum efficiency of the devices owned to the composite thin film with 1:1 value ratio (MoOx:GO) that it could be reached to 7.5 lm/W.  The lifetime of the optimization of composite was compared to the standard device fabricated with PEDOT:PSS so that the results showed a 30 times enhancement in lifetime.}, keywords = {OLED,MoOx,GO,Lifetime}, title_fa = {بهینه‌سازی تزریق حفره با استفاده از لایه ترکیبی اکسید گرافن و اکسید مولیبدن جهت افزایش طول عمر دیودهای نورتاب آلی}, abstract_fa = {با توجه به بحران انرژی در عصر کنونی، تولید ادوات در زمینه مصرف انرژی باید به سمت و سویی حرکت کند که از نظر مصرف کاملا بهینه و از نظر طول عمر تا حد ممکن زیاد باشد که خود هزینه­های تولید را کاهش می­دهد. دیودهای ­نورتاب آلی (OLED) نسل جدیدی از ادوات نورتاب هستند که از مزایای ویژه ­ای نسبت به دیگر چراغ­ها برخوردار هستند. نازک و سبک بودن، انعطاف ­پذیر بودن، شفاف بودن و راحتی در ساخت از جمله این ویژگی­ ها است. این دیودها متشکل از لایه ­های تزریق کننده حفره، الکترون و لایه نورتاب هستند. وظیفه اصلی لایه ­های تزریق­ کننده الکترون و حفره، ارسال حامل بار به لایه نورتاب است. بازترکیب در لایه نورتاب صورت می ­پذیرد که منجر به تولید نور می­ شود. در این کار تمرکز اصلی روی بهینه کردن تزریق حفره به منظور افزایش طول عمر دیودها قرار داده شده است. از ترکیبات متفاوت محلول اکسید مولیبدن (MoOx) و گرافن اکساید (GO) در ساخت لایه ­ی تزریق­ کننده حفره استفاده شد. بیشترین بازده مربوط به ترکیب نسبت 1:1 (نسبت حجمی) بود که به بازده توان lm/W  5/7 توانست برسد. طول عمر دیود بهینه شده با دیود استاندارد ساخته شده با PEDOT:PSS مقایسه شد به­ طوری که نسبت به آن حدود 30 برابر افزایش داشت.}, keywords_fa = {دیود نورتاب آلی,اکسید مولیبدن,اکسید گرافن,طول عمر}, url = {https://www.jamt.ir/article_99514.html}, eprint = {https://www.jamt.ir/article_99514_a16c4f2ced2fd83e785d90cee80fc15b.pdf} }