@article { author = {Rezaei, Mohammad Ali and Naffakh-moosavy, Homam}, title = {Comparison of the Effect of Pulsed Nd:YAG and Continuous Wave Fiber Laser on the Microstructure, weld Geometry and Weldability of Inconel 718 Superalloy}, journal = {Journal of Advanced Materials and Technologies}, volume = {7}, number = {4}, pages = {37-49}, year = {2019}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2019.84346}, abstract = {Inconel 718 is precipitation strengthened Ni-base superalloy that is strengthened by γ″ precipitate with the Ni3Nb chemical composition, widely used for medium and high temperature applications in different industries. Despite high resistance to strain aging cracking for Inconel 718, this alloy is more sensitive to solidification and liquation cracking. The main purpose of this investigation is to compare the effect of Nd:YAG pulsed laser and fiber continuous laser on  the Microstructure, Connection Geometry and Hot cracking Mechanism in Inconel 718.  For this purpose, an Nd: YAG pulsed laser device and a continuous wave fiber laser device were used. To determine the percentage of the elements, using the quantum test and an electron microscope and optical microscope (OM) was used to investigate the microstructure and electron microscopy (SEM) equipped with EDS also used for chemical analysis.}, keywords = {: Inconel 718,Nd:YAG pulsed laser,continuous wave Fiber laser,HAZ liquation cracking,Weldability}, title_fa = {مقایسه اثر لیزر پالسی Nd:YAG و لیزر پیوسته فیبری بر ریزساختار، هندسه اتصال و جوش‌پذیری سوپرآلیاژ اینکونل 718}, abstract_fa = {اینکونل 718 که یک سوپرآلیاژ پایه نیکلی رسوب سخت‌شونده محسوب می‏ شود‌ و به‌وسیله رسوبات γ″-Ni3Nb مستحکم می‏ شود، به صورت گسترده برای کاربردهای دمای متوسط و بالا در صنایع مختلفی به‌کار می‎ رود. با وجود اینکه این آلیاژ مقاومت بالایی در برابر ترک خوردن پیرکرنشی از خود نشان می‎ دهد، اما حساسیت بالایی نسبت به ترک‌های انجمادی و ترک‌های ذوبی در حین جوش‌کاری دارد. هدف از انجام این تحقیق مقایسه اثر لیزر پالسی Nd:YAG و لیزر پیوسته فیبری بر ریزساختار، هندسه اتصال و سازوکار ترک‌های داغ در اینکونل 718 می‌باشد. برای این منظور از یک دستگاه لیزر پالسی Nd:YAG و یک دستگاه لیزر موج پیوسته فیبری استفاده شد. برای تعیین درصد عناصر تشکیل‌دهنده آزمایش کوانتومتری، جهت بررسی ریزساختار از میکروسکوپ نوری (OM) و میکروسکوپ الکترونی (SEM) و هم‌چنین جهت آنالیز شیمیایی از میکروسکوپ الکترونی مجهز به EDS استفاده شد.}, keywords_fa = {اینکونل 718,لیزر پالسی Nd:YAG,لیزر پیوسته فیبری,ترک ذوبی HAZ,جوش‌پذیری}, url = {https://www.jamt.ir/article_84346.html}, eprint = {https://www.jamt.ir/article_84346_160616d78a7205a041c13aed221e57f0.pdf} }