@article { author = {Shirvani, Korosh and Esmaili, Hojatolah}, title = {Interface Thermal Stability Diffusion Aluminide and Silicon Aluminide Coatings with Ni-Based Superalloy GTD- 111}, journal = {Journal of Advanced Materials and Technologies}, volume = {4}, number = {3}, pages = {33-37}, year = {2015}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2637.70305}, abstract = {Thermal stability of aluminide coatings are affected by chemical and phase changes of the coating andcoating/substrate interface. In this paper the coating thickness and structure stabilities within interfaces of both simpleand silicon-modified aluminide coatings with GTD-111 superalloy substrate were investigated. The coatings wereprepared by high-activity pack aluminizing and slurry aluminizing, respectively. Thermal stability test was conducted in950 ˚C for 1000 h. Microstructural changes of the coatings during high temperature exposure were characterized byoptical and scanning electron microscopes. The results indicated that the substrate/coating interfaces in both coatingscomprised of two diffusion layers of PID and SID during 100-1000 h of the high-temperature exposure. However, itwas found that Si has a minor effect on the phase morphology and widening of the PID and SID in the aluminidecoatings.}, keywords = {Thermal stability,Aluminide Coating,Silicon,interface,Ni-Based Superalloy GTD - 111}, title_fa = {پایداری حرارتی فصل مشترک پوشش های آلومیناید و سیلیسیم-آلومیناید نفوذی با سوپرآلیاژ پایه نیکل GTD-111}, abstract_fa = {پایداری حرارتی پوشش های آلومینایدی متأثر از تغییرات ترکیب شیمیایی و فازی در پوشش و فصل مشترک پوشش با زیر لایه می باشد. در این مقاله پایداری حرارتی ضخامتی و ساختاری نواحی فصل مشترک پوشش‌های آلومیناید و سیلیسیم-آلومیناید نفوذی با سوپرآلیاژ پایه نیکل GTD-111 مورد بررسی و مقایسه قرار گرفته است. آزمایش پایداری حرارتی به مدت 1000 ساعت در دمای ˚C950 انجام شد. پوشش سیلیسیم آلومینایدی به روش دوغابی و پوشش آلومینایدی به روش سمانتاسیون پودری اکتیویته بالا تهیه گردید. سطح مقطع نمونه‌های پوشش به کمک متالوگرافی با میکروسکوپ الکترونی روبشی و نوری مورد بررسی قرار گرفتند. نتایج نشان داد که فصل مشترک هر دو پوشش Al وAl-Si با زیرلایه از 100 ساعت تا 1000 ساعت قرارگیری در معرض دمای بالا متشکل از دو لایه نفوذی PID و SID می باشد. تأثیر حضور سیلیسیم بر مورفولوژی فازی و گسترش ناحیه PID و نیز ناحیه مضر SID پوشش های آلومیناید نفوذی ناچیز برآورد می گردد.}, keywords_fa = {پایداری حرارتی,پوشش‌ آلومینایدی,سیلیسیم,فصل مشترک,سوپرآلیاژ پایه نیکل GTD-111}, url = {https://www.jamt.ir/article_70305.html}, eprint = {https://www.jamt.ir/article_70305_ac9958cd5f77b3bf2566277b95d30faa.pdf} }