@article { author = {Salahi, E. and Mobasherpour, Iman and Zamani, S. and Ghanbari, Arezu}, title = {Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions}, journal = {Journal of Advanced Materials and Technologies}, volume = {3}, number = {2}, pages = {71-79}, year = {2014}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2635.70264}, abstract = {Heavy metals removal by adsorption processes as general mechanisms to reduce the damage caused by heavy metals is considered. Due to a variety of reactive surface area on hydroxyapatite and cationic and anionic exchange capability, it was a matter of considerable ability is to absorb and remove heavy metals. In this study, the ability to remove heavy metal ions Pb2+ and Ni2+ and placed in the structure of apatite by the method of acid-base from aqueous solution analysis. Order of elements in solution was considered so that the atomic ratio of Ca/P, Pb/P and Ni/P is equal to 1.67. Then both acid-base reacted to form apatite structure were carried out. The precipitate obtained by the techniques of XRD, FT-IR, and TEM were reviewed and evaluated. The results showed that apatite deposition method is able to eliminate lead and nickel ions from solution are almost complete. Removal mechanism of lead and nickel ions can be formed into sedimentary apatite structure or form calcium ions hydroxyapatite and adsorption of nickel and lead in calcium hydroxyapatite and cation exchange considered.}, keywords = {Removal,Divalent lead,Divalent nickel,Apatite structure,Acid-base method}, title_fa = {حذف فلزات سنگین سرب و نیکل دو ظرفیتی به کمک ساختارهیدروکسی آپاتیتی تهیه شده به روش اسید و باز از محلول‌های آبی}, abstract_fa = {حذف فلزات سنگین به عنوان یکی از چالش های اصلی محیط زیست به­ وسیله فرایند جذب توسط هیدروکسی آپاتیت به ­دلیل وجود مناطق سطحی واکنش ­پذیر گوناگون بر روی آن مورد توجه است. در این پژوهش قابلیت حذف یون‌های فلز سنگین Pb2+، وNi2+ از محلول‌های آبی به ­وسیله قرار گرفتن در ساختار ماده آپاتیتی در حال تشکیل به­­ روش اسید و باز بررسی شد. بدین منظور مقدار عناصر در محلول‌ها به­گونه­ای در نظر گرفته شد که در تمام آزمایش‌ها نسبت اتمی Ca/P ، Pb/P و Ni/P برابر با 67/1 باشد. سپس در دو محیط اسیدی و بازی جهت تشکیل ساختار آپاتیتی واکنش ها صورت گرفت. رسوب های به دست آمده توسط تکنیک های XRD، FT-IR، و TEM مورد بررسی و ارزیابی قرار گرفت. نتایج نشان داد که روش رسوب دهی آپاتیتی قادر به حذف تقریبا کامل یون‌های سرب و نیکل از محلول است. سازکار حذف یون­های سرب و نیکل را می توان به صورت تشکیل رسوبی با ساختار آپاتیتی از یون فلز سنگین و یا تشکیل کلسیم هیدروکسی‌آپاتیت و جذب سطحی یون­های نیکل و سرب در سطح هیدروکسی‌آپاتیت کلسیم و تعویض کاتیونی در نظر گرفت.}, keywords_fa = {حذف,سرب دو ظرفیتی,نیکل دو ظرفیتی,ساختار آپاتیتی,روش اسید و باز}, url = {https://www.jamt.ir/article_70264.html}, eprint = {https://www.jamt.ir/article_70264_be3cf1dee4d874aad89964a0dc9f02fd.pdf} }