@article { author = {Oshnari, Abolfazl and maghsoudipour, amir and Hamnabard, Zohre}, title = {Preparation of Porous 45S5 Bioactive Glass by Gas Foaming}, journal = {Journal of Advanced Materials and Technologies}, volume = {-1}, number = {4-آبان89}, pages = {319-330}, year = {2009}, publisher = {Materials and Research Center (MERC)}, issn = {2783-0810}, eissn = {2783-0829}, doi = {10.30501/jamt.2010.70236}, abstract = {Bioactive 45S5 glass is a silicate-base material used for the regeneration of hard tissues such as bones and middle ear bone. Up to day, several efforts have been made to provide macro-porosity in the glass structure. The porosity plays an important role in healing process by increasing the rate of tissue reconstruction as well as biodegradation. In this work, macro porosity was introduced into the glass structure via gas foaming technique as a simple and effective method. The glass was produced by melting method, ground to fine powder and mixed with various amount of calcium carbonate as gas-foaming agent. The mixture was pressed in tabular shapes and heat treated at 1150˚C. CO2 gas produced from thermal decomposition of CaCO3 passed through the soften glass specimen led to formation of spherical macro-pores. The size and content of the pores depended on the amount of calcium carbonate. In this work, a macro-porous glass specimen with 60% porosity and macro-pore size of 60 µm was achieved using 1.8% wt of calcium carbonate. The results showed that the Heat treating caused to glass crystallization without any undesirable effect on its bioactivity.}, keywords = {Bioactive Glass,Gas-foaming,Bone substitute,porosity}, title_fa = {ساخت شیشه بیو اکتیو 45S5 متخلخل به روش تولید گاز در دمای بالا}, abstract_fa = {در این تحقیق طی یک روش ساده و مؤثر تخلخل?های درشت در ساختار شیشه از طریق ایجاد گاز در ترکیب شیشه در دمای بالا به دست آمد. پس از تهیه شیشه از روش ذوب، ماده حاصل به صورت پودر آسیاب شده و با مقادیر مختلف کربنات کلسیم مخلوط گردید و به صورت قرص پرس گردید. نمونه ها در دمای ˚C1150 قرار داده شدند که در آن دما در اثر تجزیه کربنات کلسیم و تولید گاز دی اکسید کربن و به دلیل نرم بودن شیشه ساختار متخلخل ایجاد می گردد. مورفولوژی تخلخل ها کروی شکل بوده و مقدار و سایز آنها بستگی به مقدار کربنات کلسیم مورد استفاده دارد. در این روش با استفاده از 8/1 درصد وزنی کربنات کلسیم حدود 60 درصد تخلخل در شیشه ایجاد شد که تخلخل�هایی با ابعاد حدود 60 میکرومتر نیز در آنها وجود داشت. عملیات حرارتی برای ایجاد تخلخل باعث تبلور شیشه گردید ولی در زیست فعالی آن تأثیری نداشت.}, keywords_fa = {شیشه 45S5,شیشه متخلخل,بافت استخوانی,تخلخل}, url = {https://www.jamt.ir/article_70236.html}, eprint = {https://www.jamt.ir/article_70236_10bdb6b3f6f82a4217c6c4561beec688.pdf} }